Overview
Operating temperatures up to 1600 ° C, the TAISITE MFLC-4/16D ceramic muffle furnace features an all-in-one, lightweight and compact design. Equipped with vacuum formed polycrystalline mullite fiber furnace and silicon molybdenum rod heating elements, combined with a High Accuracy microcomputer PID temperature controller and S-type Thermocouple, it achieves precise temperature control of +/- 1 ° C for a variety of high temperature processing applications.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. It has the function of opening the door and power failure and recharging delay to enhance safety.
5. Double shell air insulation structure, low surface temperature.
6. Equipped with an exhaust device, which is conducive to sample ashing and other processes.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs: over-lift alarm, menu lock, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace generates heat through a silicon molybdenum rod heating element, which is effectively insulated by a vacuum-formed polycrystalline mullite fiber furnace. The temperature control core is a microcomputer PID thermostat, which receives the actual temperature signal in the furnace detected by the S-type Thermocouple, compares and PID calculations with the user's set temperature, thereby accurately adjusting the Heating power, stabilizing the temperature in the furnace at the set value, and realizing accurate thermostatic or programmed temperature control.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
The data did not mention specific compliance criteria
Steps
1. Connect the power supply (AC220V 50Hz).
2. Set the digital display by tapping the five buttons, and enter parameters such as target temperature and time.
3. Start the equipment to start heating operation.
4. The equipment operates at a fixed value according to the setting (single-stage temperature control).
5. After the experiment, wait until the furnace temperature drops to a safe range before opening the furnace door to remove the sample.
Notice
• Operating temperature is 1600 ℃, do not use over temperature.
• When opening the door, the device will automatically power off. There is a delay in repowering after closing the furnace door. Please pay attention to safety.
• There may still be residual temperature on the surface of the furnace body, so wear protective equipment during operation to avoid burns.
• Please ensure that the power supply is equipped with an overcurrent and leakage protection switch.
• When using the vent, please pay attention to the safety of the pipeline connection.
• The equipment is heavy (gross weight 100kg), and safety should be paid attention to during handling and installation.
• Non-professionals should not disassemble or modify the internal circuits and structures.
