Overview
TAISITE MFLC-2/16P ceramic muffle furnace is an all-in-one lightweight and compact design of laboratory high temperature equipment. Its maximum Operating temperature can reach 1600 ° C, Temperature range is 300~ 1600 ° C, furnace volume is 2L, silicon molybdenum rod heating element and polycrystalline mullite fiber furnace, combined with High Accuracy Microcomputer PID Temperature Controller and S-type Thermocouple, to achieve accurate temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Dedicated function keys enable temperature setting, making operation convenient.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. Multiple safety designs, including over-lift alarm, menu lock, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace generates heat through the heating element of silicon molybdenum rod, and the heat is evenly distributed in the furnace composed of polycrystalline mullite fibers. The temperature is detected in real time by the S-type Thermocouple, and the signal is transmitted to the microcomputer PID temperature controller. The temperature controller precisely adjusts the Heating power through the PID algorithm according to the deviation of the set temperature and the measured temperature, so as to achieve fast and stable temperature control.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic firing, laboratory analysis
Steps
1. Connect the AC220V 50Hz power supply.
2. Use the touch of five buttons to set the target temperature, program Linear dispersion or timing parameters.
3. Start the equipment after confirming that the furnace door is closed.
4. The equipment is heated, kept warm and operated according to the set program.
5. After the operation, wait for the furnace temperature to chill down naturally or operate according to safety procedures.
6. Real-time temperature and operating status can be monitored through a dual-line LED digital display.
Notice
• When the equipment is running and just after the operation, the furnace body is at high temperature, do not touch it, and beware of burns.
• When opening the door, the device will automatically power off. There is a delay in repowering after closing the furnace door. Please wait.
• Do not heat flammable, explosive or toxic gases in the furnace.
• When using, please ensure that the exhaust hole is unobstructed to facilitate the discharge of volatile matter.
Equipment should be installed on a well-ventilated and stable countertop, away from flammable materials.
• Regularly check the power cord and overcurrent leakage protection switch to ensure electrical safety.
• Non-professionals should not disassemble or modify the internal structure and circuitry of the equipment.
• Please pay attention to the Device weight (gross weight 90kg) when handling to avoid bumping.
