Overview
TAISITE MFLC-2/16T ceramic muffle furnace is a high temperature heating equipment with a maximum temperature of 1600 ° C. It adopts an all-in-one lightweight and compact design. Its core is made of vacuum-formed polycrystalline mullite fiber furnace and silicon molybdenum rod heating elements, combined with High Accuracy microcomputer PID control and 7-inch color Touchscreen programmable temperature control instrument, which realizes accurate temperature control (temperature control accuracy +/- 1 ° C) and convenient operation experience.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Thermocouple Combined with S-type Thermocouple for accurate temperature control.
8.7 inch color Touchscreen, support finger touch light point setting, intuitive operation.
9. With real-time Linear dispersion recording, U disk data export, correction, gating and other ancillary functions.
10. Multiple safety designs: over-rise alarm, menu lock, over-rise prevention, door opening and power failure, restart delay, over-current and leakage protection switch.
Principle
The muffle furnace generates heat through a silicon molybdenum rod heating element, which is effectively insulated by a vacuum-formed polycrystalline mullite fiber furnace. The temperature control core adopts microcomputer PID control technology, which monitors the temperature in the furnace in real time through S-type Thermocouple, and feeds back the signal to the 7-inch color Touchscreen program temperature controller. The temperature controller performs precise PID operations according to the setting program or fixed value, and dynamically adjusts the Heating power, so as to achieve accurate control and stability of the temperature in the furnace.
Applications
Material sintering, ashing experiment, high temperature heat treatment, ceramic processing, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
1. Turn on the power supply (AC220V 50Hz).
2. Set the target temperature, program or timing parameters through the 7-inch color Touchscreen.
3. Start the heating operation.
4. Linear dispersion can be observed in real time through the screen during the experiment.
5. After the experiment is completed, the data can be exported to the USB flash drive.
6. After the furnace body is chilled down, clean it up.
Notice
• Please pay attention to high temperature during operation to avoid burns.
• When the furnace door is opened, the power will be automatically cut off. There will be a delay in the return of power after closing. Please wait for the system self-test to complete.
• Do not touch the heating part while the equipment is running.
• Please ensure that the exhaust hole is unobstructed before use.
• Please perform equipment calibration regularly to ensure temperature control accuracy.
Before moving or cleaning equipment, be sure to disconnect the power supply.
• Do not overheat or use the device overtime.
