Overview
TAISITE MFLC-8/16T ceramic muffle furnace is a high temperature experimental equipment with a maximum operating temperature of 1600 ° C. It adopts an all-in-one lightweight and compact design. Its core is a vacuum-formed polycrystalline mullite fiber furnace combined with silicon molybdenum rod heating elements, combined with a High Accuracy Microcomputer PID Control system and a 7-inch color Touchscreen to achieve precise temperature control and convenient operation experience.
Features
1. Integrated lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design, with the hot end away from the operator.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate the sample ashing process.
7. High Accuracy Microcomputer Temperature Controller combined with S-type Thermocouple, temperature control accuracy of +/- 1 ℃.
8.7 inch color Touchscreen, support finger touch light point setting.
9. With program operation function, it supports 50-step program setting.
10. Comprehensive safety features, including over-lift alarm, menu lock, over-lift prevention, door opening and power failure, and over-current and leakage protection.
Principle
The muffle furnace generates heat through a silicon molybdenum rod heating element, which is effectively insulated by a furnace composed of vacuum-formed polycrystalline mullite fibers. The temperature control core uses a microcomputer PID Control system to monitor the temperature in the furnace in real time through an S-type Thermocouple and feed back the signal to the controller. The controller precisely adjusts the Heating power through a PID algorithm according to the deviation of the set temperature and the measured temperature, so as to achieve fast and stable temperature control. The color Touchscreen provides a human-machine interaction interface for setting temperature, program and monitoring operation status.
Applications
Material sintering, ceramic processing, ashing experiments, high temperature heat treatment, laboratory analysis
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the AC380V power supply.
2. Set the target temperature or program by tapping the 7-inch color Touchscreen.
3. Start running after confirming the parameters.
4. Real-time temperature and Linear dispersion can be monitored through Touchscreen during operation.
5. After the program runs or reaches the scheduled time, the equipment stops heating.
6. After the furnace chills down, open the furnace door and take out the sample.
Notice
• The device needs to use AC380V power supply, please make sure the power supply matches.
• The furnace body is at high temperature, and protective equipment needs to be worn during operation to avoid burns.
• When opening the door, the device will automatically power off. After closing the furnace door, it will take a delay to power back. Please do not force the operation.
• When the furnace is at high temperature, do not put flammable and explosive items.
• When using the exhaust hole, ensure that the exhaust is smooth.
• Device weight up to 110kg, handling and installation should pay attention to safety.
• Regular equipment maintenance and calibration to ensure temperature control accuracy.
• Do not make unnecessary parameter modifications or Touchscreen operations while the device is running.
In case of malfunction or abnormal alarm, the machine should be stopped immediately for inspection.
