Overview
The CHNSPEC CS-610B (6mm) Colorimeter is a Portable spectroscopic color measurement analyzer with D/8 Illumination condition. It can not only measure color differences, but also analyze Color values, and configure a variety of Measurement light sources and Color Spaces. The instrument is ergonomically designed, easy to operate, and has a novel appearance. It is designed with a pre-positioning plate, which simplifies the calibrating process. Its performance is superior and cost-effective. It is widely used in field operations in factories and laboratories. It is sufficient to achieve good color measurement in quality control of almost all Applications.
Features
1. Obtain domestic metrology authentication.
2. Large storage space.
3. Large TFT display.
4. Novel and fashionable Appearance design based on ergonomics.
5. Simple operation mode, simple Operating interface.
6. Pre-positioning board design makes it easy to handle test alignment.
7. LED Illuminant, longer service life.
8. Low-power design, high-capacity rechargeable lithium battery configuration.
9. Simultaneous measurement of SCI (including mirror reflection) and SCE (eliminating mirror reflection).
10. USB transfer data, PC software controls color data.
11. Can be connected to a micro printer for printing.
12. With camera framing function.
13. Professional horizontal design, avoid hand shake, test more accurate.
14. Large storage space: 100 sets of master standards can be stored, with a maximum of 200 test records under each set of master standards.
15. SCI/SCE data can be displayed through the LCD panel.
16. Can be customized according to user requirements measurement caliber (CS-610B).
Principle
The CHNSPEC CS-610B Colorimeter uses a d/8 (scattering Illuminant, 8 degree viewing angle) illumination method and uses a dual optical path array Sensor. It uses CLEDs (full-band equalized Led Illuminant) to illuminate the sample and calculate various chroma indicators by measuring the light spectrum of the sample reflection. The instrument has the simultaneous measurement function of SCI (including mirror reflection) and SCE (eliminating mirror reflection), which can accurately analyze the color characteristics of the sample.
Applications
Laboratory, factory, field operation
Standards
Obtain domestic metrology authentication
Steps
Step 1 Power on.
2. Use pre-positioning plates for alignment.
3. Measurement mode and parameters.
4. Place the sample for measurement.
5. View the measurement results (such as Light spectrum, chromatic value, color difference value, etc.) through the display screen.
6. Data can be transferred via USB to PC software for further analysis or storage.
7. Can be connected to a micro printer to print results.
Notice
Operating environment: 0-45 ℃, relative humidity 80% or less (at 35 ℃), no water condensation.
Storage environment: -25~ 55 ℃, relative humidity 80% or less (at 35 ℃), no water condensation.
Please use a dedicated DC adapter or a removable lithium battery pack for power supply.
The instrument does not contain UV Illuminants.
The measurement diameter is 6mm (CS-610B), which can be customized according to requirements.
· To avoid jitter during handheld operation, it is recommended to use horizontal design for stable measurement.
