Overview
The HZLB LGZ-500B intelligent light Chamber is a 500L precision foster device with a large screen LCD program control, which is intuitive and easy to operate. It provides precise temperature, Humidity and light control, suitable for plant growth, seed germination and other biological fostering experiments. The liner is made of stainless steel, which is sturdy and durable.
Features
1. Large-screen LCD program control, Chinese-guided operation, blue backlight for easy viewing at night.
2. Intuitively display the operation process, light level, set temperature, temperature in the box, Beijing time, remaining time of the period, Ambient Temperature and protection temperature.
3. 1-99 time slots can be set, with a time range of 0-999 hours for each time period, enabling automatic conversion.
4. Program control Illumrination degree 0-3 adjustable (strong light mode 0-8 adjustable).
5. The liner protection temperature can be set, and the software and hardware will automatically cut off the heating power supply when it exceeds the temperature to protect the sample.
6. With Ultra Temperature Sensor Abnormal Protection Function to Ensure Instrument and Sample Safety.
7. Using LED Cold Illuminant, the beam of light does not generate heat, extracting useful light that is conducive to plant growth.
8. With power-down memory and automatic compensation function for power-down time, the original working state can be continued after power failure.
9. With Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function.
10. Optional with full Light spectrum plant growth lamp (disinfection mold lamp), sterilization function, data network extraction and remote monitoring function (transmitted to the cloud platform through GPRS or mobile WeChat Mini Program to view).
Principle
The incubator uses a microcomputer program controller to comprehensively control the temperature, Humidity and light in the box. Temperature control is achieved through the heating system and the Compressor refrigeration system (intermittent operation); Humidity is controlled through the humidification system; and the light is provided by the LED Illuminant system, which can be programmed at multiple levels. The system continuously monitors various parameters and realizes precise control and Safety protection through Sensor feedback.
Applications
Plant growth research, seed germination test, microbial fostering, tissue fostering, seedling raising, disease resistance research
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Through the large-screen LCD screen, set the required temperature, Humidity, light level and Working time according to the Chinese operation instructions.
3. Programmable settings for 1-99 operating periods and their parameters.
4. Start the device, and the system will automatically run according to the set program, displaying various parameters in real time.
5. After the operation is completed or when it needs to be interrupted, proceed with the corresponding operation.
Notice
* The equipment should work in an environment with a temperature of 0-35 ° C and no corrosion gas.
* Note Power supply voltage requirement is 220V +/- 22V, Frequency 50Hz +/- 0.5Hz.
* The Compressor has a dynamic delay protection time (about 3 minutes), do not switch frequently.
Optional functions (e.g. germicidal lamp, network module) need to be configured according to actual needs.
* Regularly check the status of the Sensor and use the fault identification function of the equipment for maintenance.
* Set liner protection temperature to prevent sample damage due to accidental overheating.
