Overview
HZLB LGZ-1500B intelligent light Chamber is a large-scale foster equipment with a volume of 1500L. It adopts large-screen LCD program control, intuitive and easy operation, and has accurate temperature, Humidity and light control functions. It is suitable for plant growth, seed germination and other experiments and foster scenarios that require simulated lighting environments.
Features
1. Large-screen LCD program control, Chinese guidance operation process, simple and easy to understand operation, accurate control, blue backlight for easy viewing at night.
2. Intuitively display the operation process, light level, set temperature, temperature in the box, Beijing time, remaining time of the period, Ambient Temperature and protection temperature.
3. 1-99 time periods can be set, with a time range of 0-999 hours for each time period, to achieve automatic program conversion.
4. Program control Illumrination degree 0-3 adjustable (strong light 0-8 adjustable).
5. The liner protection temperature can be set, and the heating power supply can be automatically cut off when it is higher than the set value to protect the test sample.
6. With Ultra Temperature Sensor Abnormal Protection Function to Ensure Instrument and Sample Safety.
7. Using LED Cold Illuminant, the beam of light does not generate heat, extracting useful light that is conducive to plant growth.
8. It has the functions of power-down memory and automatic compensation for power-down time. It can be turned on again after a power outage to continue the original working state.
9. With Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function, easy to failure analysis and elimination.
10. Optional with full Light spectrum plant growth lamp (disinfection mold lamp), sterilization function, data network extraction and mobile terminal WeChat Mini Program viewing function.
Principle
The light Chamber precisely sets and automatically adjusts the temperature, Humidity and light in the box through a microcomputer program Control system. The system controls the switching and light intensity of heating, cooling, humidification and LED Illuminant according to the preset time period program to simulate the required growth environment. At the same time, the state of the box is monitored in real time through multiple Sensors, and it has a protection function to ensure safe operation.
Applications
Plant growth research, seed germination experiments, biological fostering, agricultural research
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Through the large-screen LCD screen, set the required temperature, Humidity, light level and running time program according to the Chinese operation guidelines.
3. After confirming that the parameters are set correctly, start the device and start running.
4. During operation, various real-time parameters and operating status can be visually viewed through the screen.
5. After the operation is over or when it needs to be stopped halfway, turn off the equipment according to the operation instructions.
Notice
* Equipment should be placed in a temperature of 0-35 ℃, no corrosion gas environment.
* Power supply voltage must be in the range of 220V +/- 22V, Frequency is 50Hz +/- 0.5Hz.
* The Compressor has 3 minutes delay protection, and frequent switching should pay attention to the interval time.
* Pay attention to the protection temperature and Sensor status displayed by the device to ensure safe operation.
Optional functions (such as sterilization lamp, data network transmission, etc.) need to be confirmed according to the actual configuration.
