Overview
HT-300N spring tensile and compression testing machine is a special testing instrument produced by HBO, which is used to test the deformation and load relationship characteristics of tensile and compression springs. It is suitable for measuring the working load of springs under a certain working length.
Features
1. Has the first peak hold function during testing.
2. Adopt LCD screen, equipped with blue backlight.
3. High Accuracy, High resolution and High sampling speed.
4. Can set the upper and lower limit alarm value, support sound and light alarm and level signal output (high and low can be set).
5. 200 sets of test data can be stored, and the average value, MAX Maximum, and MIN Minimum of the stored data can be automatically calculated.
6. Support three units (N, KGF, LBF) for automatic conversion.
7. Peak hold function, the hold time can be set (0 to 99 seconds).
8. Automatic shutdown without operation, the time can be set freely (0-99 minutes).
9. Support serial communication (can be conveniently configured for USB communication), the computer can display force value Linear dispersion, force value table and other methods, and process the data (such as printing, statistical analysis).
10. Micro printers can be selectively installed.
Principle
Sensor measurement of the force generated by the spring during stretching or compression, and real-time collection, processing and display of deformation and corresponding load data to analyze the mechanical characteristics of the spring.
Applications
Tension spring test, compression spring test
Standards
The information does not mention
Steps
The information does not mention
Notice
The information does not mention
