Overview
The BC-110 Portable Roughness Gauge is a new generation of pocket surface roughness instrument under the PORUIKE brand. It is based on the principle of needle tracing, adopts professional sensing system and DSP technology, and has the characteristics of high Measuring accuracy, wide range, simple operation, easy portability and stable work. It is suitable for the detection of various metal and Non-metallic machined surfaces. The instrument adopts the integrated design of Sensor host and is handheld and portable, which is especially suitable for production site use, which helps to improve production efficiency and reduce production costs.
Features
1. Compatible with ISO, DIN, ANSI, JIS multiple national standards, for metal and Non-metallic processing surface roughness testing.
2. Large range, a variety of parameters can be selected Ra, Rz, Rq, Rt, Measurement range up to 160μm, and can choose sampling length 0.25mm, 0.80mm, 2.50mm.
3. Adopt 128 × 64 OLED point array display, digital/graphic display, highlight without dead ends, display information rich and intuitive.
4. Using high-speed DSP processor for data processing and calculation, fast speed and higher accuracy.
5. Reliable anti-motor dead circuit and software design.
6. Built-in lithium-ion rechargeable battery and charging control circuit, high capacity, no Memory effecy, Continuous Operating Time greater than 20 hours, with remaining power indication and charging process display.
7. Data storage, can store 100 sets of original data sources and waveforms.
8. Real-time clock setting and display for easy data recording and storage.
9. With automatic sleep, automatic shutdown and low power consumption software and hardware design, the instrument Working time is super long.
10. Display measurement information, menu prompt information, error information and switch machine and other prompt information.
11. Ergonomic full metal shell design, sturdy, compact, portable, Reliability.
12. Chinese/English language selection (customizable).
13. High Accuracy Piezoelectric Crystal Sensor for accurate measurement.
14. Mini USB charging port, which can charge the instrument with a mobile phone charger.
15. Optical inspection Glass matrix for calibrated sample block, high accuracy, not easy to scratch, long service life.
16. The Sensor probe protection door is set up, which can be closed when not measuring to effectively protect the Sensor probe.
Principle
The BC-110 Portable Roughness Gauge is based on the working principle of the needle tracing method. The instrument uses the High Accuracy Piezoelectric Crystal Sensor (stylus) to move on the surface to be tested, converting the microscopic unevenness of the surface into an electrical signal. The signal is professionally digitalized and calculated via the built-in high-speed DSP processor, and finally the surface asperity parameters are displayed in the form of numerical values (such as Ra, Rz, Rq, Rt) and graphics on the OLED display.
Applications
Machining manufacturing (mainly metal processing manufacturing), Non-metallic processing manufacturing (such as ceramics, plastics, polyethylene (PE), etc.), couplings on switches, integrated circuit semiconductors, etc
Standards
ISO、DIN、ANSI、JIS
Steps
1. Turn it on and check the battery level.
2. According to the measured material and requirements, select the appropriate Measurement parameters (such as Ra, Rz, etc.), sampling length and evaluation length in the instrument settings.
3. If you need to calibrate, use the matching Optical inspection Glass calibrated sample for calibrating operation.
4. Open the Sensor probe protection door and place the instrument probe smoothly and vertically on the surface of the workpiece to be tested.
5. Start the measurement, and the instrument stylus will automatically cross the sampling length for detection.
6. After the measurement is completed, read and record the asperity parameter values and/or waveforms displayed on the OLED display.
7. The measurement Data storage to the instrument internal memory.
8. After the measurement, close the Sensor probe protection door.
9. After use, press the power button to shut down or turn off the instrument by the automatic shutdown function.
Notice
• Ambient Temperature should be between -20 ℃~ + 40 ℃, storage temperature between -30 ℃~ + 70 ℃, relative humidity should be ≤ 90%.
• The instrument should avoid use or storage in an environment with strong vibration, strong magnetic field, corrosion medium and serious dust.
• During measurement, ensure that the Sensor probe (stylus) is in smooth and vertical contact with the surface to be tested to obtain accurate data.
• When not taking measurements, be sure to close the Sensor probe protection door to prevent damage to the stylus from accidental collision or contamination.
• Please use a charger with specifications of DC 5V and 500mAh to charge the instrument through the Mini USB port. It takes about 3 hours to fully charge.
• Avoid excessive discharge, pay attention to the power indicator icon, and charge in time to ensure the normal operation of the instrument.
• The calibrated sample is a precision Optical inspection Glass product, which should be handled with care to avoid scratching or falling to maintain its calibrating accuracy.
• The instrument is a precision measurement device, please do not disassemble or modify it without authorization.
• When not in use for a long time, it is recommended to keep the instrument power at a moderate level and store it in a drying and cool place.
