Please contact customer service
Integrated design of host and printer, easy to carry and print on site. Adopt large-screen OLED display, intuitive information. Can store 600 sets of data, support automatic conversion of various Hardness standards, and have data communication and software Adjustment.
Category : Leeb Hardness Tester
Brand : PoRuiKe
SKU : NB029798
Service :The delivery and service By NBCLab.Com
PORUIKE BH-360B Leeb hardness tester is an integrated printing Portable hardness gauge. The integrated design of the host and the printer makes it easy to print the results when going out for inspection. It has high cost performance. The instrument adopts a streamlined ergonomic design, equipped with a standard bracket and a large-screen OLED 128 × 64 point array display. The information display is intuitive and the operation is convenient. It is suitable for Hardness detection of steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel and other metal materials.
1. According to the Richter Hardness Principle, High Accuracy Testing can be carried out on a variety of metal materials. 2. Support "forged steel (Steel) " material, and the HB value can be directly read when testing with D/DC type Impact device, without manual table checking. 3. It is convenient to switch to all Hardness standards (HL, HB, HRB, HRA, HRC, HV, HS), and convert each Hardness measurement value in parallel. 4. Adopt large screen 128 × 64 graphic point matrix LCD, rich and intuitive information, support full Chinese menu operation. 5. With bright backlight display, adapt to the gray environment of light rays. 6. Equipped with RS232 communication interface, it is convenient to exchange data and set parameters with PC. 7. One main unit can automatically identify and be equipped with 7 different Impact devices, and there is no need to re-calibrate when replacing. 8. It can store up to 600 sets of Hardness measurement data, each set contains information such as single Measured value, average value, date, Impact direction, number of times, material, Hardness system, etc. 9. The upper and lower limits of the Hardness value can be preset, and the automatic alarm beyond the range can be set to meet the needs of batch testing. 10. Full sealing shell design, small and portable, Reliability, anti-vibration, Impact and electromagnetic interference, suitable for harsh environments. 11. Powered by 2 AA ordinary alkaline batteries or 3.7v lithium-ion batteries, it can work continuously for not less than 150-500 hours, with power-saving functions such as automatic sleep and automatic shutdown, and the LCD screen has a remaining power indicator. 12. Adjustment of indication software. 13. Can be equipped with powerful microcomputer software to achieve data transmission, storage management, statistical analysis, printing reports, and other functions.
The instrument works according to the Richter Hardness Measurement principle. The impact body is ejected to the surface of the measured material through the Impact device, and the ratio of the rebound speed of the Impact body to the impact speed at a distance of 1mm from the surface of the sample is measured. The internal processor of the instrument can automatically convert the Richter Hardness value to Miscellaneous Hardness values such as Brinell (HB), Rockwell (HRC, HRA, HRB), Vickers (HV), and Shaw (HS).
Machining industry, installed machinery or permanent assembly parts, mold cavities, heavy workpieces, Pressure Vessels, turbo-generator sets and their equipment failure analysis, workpieces with small experimental space, bearings and other parts, material classification in metal material warehouses, rapid detection of large workpieces in a wide range of multiple measurement sites
"Leeb hardness tester technical conditions" JB/T 9378-2001
1. Select the appropriate Impact device according to the tested material and install it on the main engine. 2. Turn it on and set the parameters such as the material type and Hardness standard to be tested through the Chinese menu. 3. Press the Impact device vertically or in the desired direction (supporting 360 ° direction) on the surface of the workpiece to be tested. 4. Press the Impact button for measurement and the Measured value will be displayed on the screen. 5. If you need to store, confirm to save the current measurement data. 6. You can connect to a PC through the RS232 interface and use the supporting software for data transmission, analysis, or printing reports. 7. After use, turn off the power.
• Ambient Temperature should be between -10 ℃~ + 55 ℃, storage temperature between -20 ℃~ + 75 ℃. • The relative humidity of the working environment should be ≤ 90%. • Avoid use in environments with strong vibration, strong magnetic fields, corrosion media and severe dust. • During measurement, ensure that the Impact device fits closely with the measured surface and is in the correct direction. • Pay attention to the battery level indicator and replace or charge the battery in time to ensure normal operation. • The instrument has automatic sleep and shutdown functions to save power. Please shut down when not in use for a long time. • When replacing the Impact device, the instrument can be automatically identified without recalibrating, but it is necessary to ensure that the device is installed in place. • When setting the upper and lower limits of Hardness, please set it reasonably according to the expected Hardness range of the tested material, so that the alarm function is effective. • Before performing important tests, it is recommended to use standard test blocks to verify or calibrate instrument indications.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
