Please contact customer service
Optical inspection measurement system and photoelectric sensing technology, the test force covers 10-1000gf, Microscope magnification up to 400X, suitable for small, thin specimens and brittle materials.
Category : Other Hardness Testers
Brand : PoRuiKe
SKU : NB029808
Service :The delivery and service By NBCLab.Com
PORUIKE HVS-1000A digital display microscope Vickers hardness tester, by pressing the surface of the workpiece, using the reading Microscope measurement Crowder diagonal length, and combined with the test force conversion to obtain Vickers Hardness. The instrument is mainly used to test the Hardness of small precision parts, surface hardening layers, platings, thin sheets and fine wires. Equipped with an automatic turret device, the performance is stable, the structure is sturdy, Reliability is high, and the operation is easy. Optical inspection measurement system and photoelectric sensing technology, powerful, widely used in Hardware processing, electronics industry, Engineering Quality control and other fields, is an ideal hardness testing instrument for scientific research institutions, processing manufacturing and Quality control departments.
1. The mechanical design is quiet, the electrical test process is controlled by the CPU, and the Optical inspection adopts high-definition measurement system and photoelectric sensing technology. 2. Through the touch key operation of the panel, the test force holding time can be preset, the Vickers or Knoop test method can be selected, and the strength of the Measurement light source can be adjusted. 3. LCD LCD display measurement Crowd length, Hardness system, measurement times, etc., support printer output and computer networking through RS232 interface. 4. Optional CCD device, video device and camera device according to user request. 5. Suitable for the measurement of micro, thin specimens, surface infiltration treatment parts, and agate, Glass, ceramics and other brittle materials of Vickers and Knoop Hardness.
After the hardness gauge is pressed on the surface of the workpiece to form a Cedar, the diagonal length of the Cedar is measured by the reading Microscope. Finally, the Vickers Hardness value of the material is calculated by using the conversion relationship between the diagonal length of the Cedar and the applied test force.
Hardware processing, Electronics industry, Engineering Quality control, Material research, Scientific testing, Heat treatment, carbonation, hardening layer, surface coating, Steel, Non-ferrous metals, Small and thin parts, Glass, Ceramics, Agate, Artificial gemstones and other brittle materials, Metallographic and metallographic research, Research on brittleness of refractory compounds, Dental materials
EN-ISO6507, ASTME384 E92, JIS standard, GB/T4340
Install the instrument horizontally on a solid foundation to ensure that the environment meets the Operating Conditions (temperature 10 ° C~ 38 ° C, Humidity ≤ 65%, no vibration, no corrosion medium). 2. According to the test requirements, preset the test force and hold time through the panel touch button, and select the Vickers or Knoop test method. 3. Place the sample on the XY test bench and adjust the position. 4. Start the test, and the instrument automatically completes the loading, loading, and unloading process. 5. Microscope observation, measurement of diagonal length, Hardness value and other related parameters will be displayed on the LCD screen. 6. Data can be output through a printer or transmitted to a computer via an RS232 interface.
* Ambient Temperature should be kept between 10 ℃ and 38 ℃. * environment relative humidity should not exceed 65%. * The instrument needs to be used in an environment without vibration and no corrosion medium around. Horizontal installation must be carried out on a solid foundation. When testing, the appropriate test force and test method should be selected according to the material characteristics (such as small, thin or brittle materials). * Note that the maximum distance from the center of the indenter to the machine wall is 90mm, and the maximum height of the applicable material is 100mm. Before use, please confirm that the instrument configuration (e.g. whether a CCD or camera device is optional) meets the test requirements.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
