Please contact customer service
Optical inspection measurement system with automatic turret and high definition, test force range of 10-1000gf, Microscope magnification of 400X, can accurately determine micro-Vickers and Knoop Hardness of small, thin specimens and brittle materials.
Category : Other Hardness Testers
Brand : PoRuiKe
SKU : NB029809
Service :The delivery and service By NBCLab.Com
PORUIKE HVS-1000B automatic turret microhardness gauge is to press the surface of the workpiece, and then the length of the diagonal of the Cedar is measured by the reading Microscope, and finally a conversion relationship between the diagonal and the test force is used to measure Vickers Hardness. Mainly used to test the Hardness of small precision parts, surface hardening layer Hardness and effective hardening layer depth, surface Hardness of platings, sheet material and fine wire Hardness, it is equipped with automatic turret device, stable performance, strong structure, Reliability, simple operation, controlled by CPU test process, equipped with high-definition Optical inspection measurement system, photoelectric sensing and other new technologies, with the help of computer-aided means to achieve powerful functions. It is widely used in Hardware processing, electronics industry, engineering Quality control and other fields. It is a satisfactory hardness testing instrument for material testing in scientific research institutions, processing manufacturing and Quality control departments.
1. The instrument adopts a quiet design mechanically, and the CPU controls the test process electrically. Optical inspection uses high-definition Optical inspection measurement system, photoelectric sensing and other new technologies. 2. The operation is input by the touch key on the panel, which can preset the test force holding time, select the Vickers or Knoop test method, and adjust the strength of the Measurement light source. 3. It can display the measurement Crowd length, Hardness system, measurement times, etc. on the LCD LCD screen, and output through the printer, and can also be networked with the computer through the RS232 interface. 4. The hardness gauge can also configure CCD devices, video devices and camera devices according to the special needs of users. 5. Suitable for the measurement of small, thin specimens, surface infiltration treatment of parts, can be agate, Glass, ceramics and other brittle materials of micro-Vickers and Knoop Hardness determination, R & D institutions, Universities & colleges, production enterprises and testing institutions for research and testing of hardness testing instrument.
The surface of the workpiece is pressed, and then the length of the diagonal of the Cedar is measured by the reading Microscope, and finally the Vickers Hardness is measured by a conversion relationship between the diagonal and the test force.
Hardware processing, Electronics industry, Engineering Quality control, Material research, Scientific testing, Heat treatment, carbonation, hardening, surface coating, Steel, Non-ferrous metals, Small and thin parts, Glass, Ceramics, Agate, Artificial gemstones and other brittle and hard materials
EN-ISO6507, ASTME384 E92 and JIS standards, GB/T4340
1. Install the hardness gauge horizontally on a solid foundation. 2. Ensure that the operating Ambient Temperature is 10 ℃~ 35 ℃, relative humidity ≤ 65%, no vibration, no corrosion medium. 3. Measurement light source strength is adjusted by panel touch key preset test force holding time, select Vickers or Knoop test method. 4. Place the sample on the XY test bench and adjust the position. 5. Start the test, and the equipment automatically completes the loading, loading, and unloading process. 6. Microscope observation and measurement of Cedar diagonal length, Hardness value and other information will be displayed on the LCD LCD screen. 7. Data can be output through the printer or transferred to the computer through the RS232 interface.
The operating temperature should be maintained at 10 ° C to 35 ° C. • The relative humidity should be ≤ 65%. • It needs to be operated in an environment without vibration and no corrosion medium around. • It must be installed horizontally on a solid foundation. • The test force holding time can be set to 1-99s. The maximum height of the applicable material is 100mm. • The maximum distance from the center of the indenter to the machine wall is 90mm. • Microscope magnification is 400X (for testing) and 100X (for observation). • Illuminant halogen lamps with green and blue filters. • Optical channels can be switched in both directions: eyepiece or CCD.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
