Overview
The SUNDOO LP-10120 Deep Throat Thickness Gauge is a Dial thickness gauge with a throat depth of 120mm. It is suitable for the measurement of wide specimens. Measurement range is 0~ 10mm. The instrument is equipped with a base to ensure stable and reliable measurement process.
Features
The throat depth is large, up to 120mm, which is convenient for measurement of wider samples.
2. Using Dial indication, the reading is intuitive and clear.
3. Equipped with base, stable measurement.
4. Measurement accuracy is +/- 0.02mm, Graduation is 0.01mm.
Principle
Measurement principle of mechanical contact, the probe is in contact with the object to be measured, and its displacement is converted into the deflection of the pointer through the internal mechanical structure, so that the thickness value is directly indicated on the dial.
Applications
It is suitable for industrial fields and Quality control links that require measurement of wider sample thickness.
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Place the thickness gauge on a stable base.
2. Lift the measurement rod and place the tested sample between the probe and the anvil.
3. Slowly lower the measurement rod so that the probe is in contact with the sample surface.
4. After the hands are stable, read the corresponding thickness value on the dial.
Notice
• Please make sure the instrument is reset to zero before use.
• When measuring, the measurement rod should be handled with care to avoid Impact affecting the accuracy or damaging the probe.
• Keep the probe and anvil clean and free of oil or impurities.
• The instrument should be stored in a drying, non-corrosive gas environment.
Periodically calibrated to ensure measurement accuracy.
