Overview
The SUNDOO LP-D1030 Digital Percentage Thickness Gauge is a percentage gauge thickness gauge in the LP series of thickness gauges that digitally displays the measured thickness value. The measurement method is the same as that of the Miscellaneous Dial thickness gauge, which improves the efficiency of thickness measurement through a faster and more intuitive display method. The thickness gauge has a Measurement range of 0~ 10mm, a Measurement accuracy of +/- 0.02mm, and a throat depth of 30mm.
Features
1. Adopt digital and explicit readings, which are intuitive and fast.
2. Measurement accuracy is high, Graduation is 0.01mm.
With a throat depth of 30mm, it is suitable for measurement of a certain depth.
Principle
The thickness gauge adopts the principle of percentimeter thickness measurement. Through contact measurement, the displacement of the probe is converted into a digital signal and displayed, so as to obtain the thickness value of the measured object.
Applications
It is suitable for industrial fields and Quality control fields that require measurement of material thickness.
Standards
The data did not mention specific compliance criteria.
Steps
1. Place the thickness gauge on a smooth surface.
2. Place the test object between the probe and the measurement table.
3. Gently press down the probe or lift the measurement table to make the probe contact with the tested object.
4. Read the stable thickness value displayed on the digital display screen.
Notice
• Please ensure that the instrument is fully charged or in normal working condition before use.
• When measuring, make sure that the probe is in vertical contact with the surface of the tested object.
• Avoid use in environments with strong magnetic fields or violent vibrations.
• After the measurement is completed, please reset the probe and keep the instrument properly.
• Regularly clean the probe to keep it clean and free of dirt.
