Overview
HONEYEAGLE online hydrogen sulfide detector HNAG1000-H2S (0-100PPM) is suitable for real-time and accurate detection of hydrogen sulfide gas concentration and leakage in various environments. The product adopts imported Electrochemical sensor and microcontroller technology, which has the advantages of fast Response Speed, High Measurement accuracy, Stability and Repeatability. Explosion-proof wiring is suitable for dangerous places, compatible with various Control systems, support on-site alarm and standard signal output.
Features
1. Intrinsically Safe Circuit Design, Explosion Proof Certification, Level 2 Lightning Protection, Anti-static, Anti-High Intensity Pulse Surge Current Impact, High Reliability and Stability
2. Standard bus RS485 and 4~ 20mA standard signal output at the same time, optional multiple signal output and wireless transmission, support remote real-time monitoring
3. Compatible with secondary meter, data collection module, PLC, DCS system, can drive equipment directly or through relay drive high power equipment
4. Standard infrared remote control, no open cover operation in dangerous situations, support to modify alarm points, calibrate, etc
5.2.5 inch high definition color screen display real-time concentration, temperature, Humidity
6. Automatic zero tracking to prevent drift, temperature compensation, multi-level calibrated, in line with national standards and local Measurement Bureau standards
Principle
Electrochemical sensor and microcontroller technology are used to detect the concentration of hydrogen sulfide in the atmosphere by diffusion Sampling method. The sensor converts the gas concentration into electrical signal, and outputs the standard signal and display data after processing by the microcontroller to achieve fast Response and accurate measurement.
Applications
Petroleum and petrochemical, chemical plants, smelters, steel plants, coal plants, thermal power plants, scientific research, production workshops, Tobacco companies, environment monitoring, school scientific research, building construction, fire alarm, sewage treatment, industrial gas process control, boiler room, waste treatment plant, tunnel construction, oil pipeline, gas station, underground gas pipeline maintenance, indoor air mass detection, dangerous place safety protection, aerospace, military equipment monitoring
Standards
EMI, EMC Standard, National Standard Testing, CMC Measurement Equipment License Certification, GB 3836.1 - 2010, GB 3836.2 - 2010, GB 3836.4 - 2010
Steps
1. Fixed installation of the detector at the designated location
2. Connect the power supply and output interface
3. Use infrared remote control for parameter setting, such as modifying alarm points or calibrating
4. Monitor real-time concentration, temperature, Humidity through the display
5. Connect Control system or remote monitoring equipment as needed
Notice
• Ensure that the Working Ambient Temperature is within the range of -30~ 50 ℃
• Avoid use under condensation conditions, Operating humidity should be controlled at 0~ 95% RH non-condensation
• Pay attention to explosion-proof requirements during installation and meet relevant standards
Periodically calibrated to maintain accuracy
• Use the infrared remote control to operate in dangerous situations and avoid opening the lid
Power supply voltage DC5V +/- 1% or DC24 +/- 1%
• Note that the service life of the Sensor is 3-5 years, replace it in time
