Overview
HONEYEAGLE Online Hydrogen Bromide Detector HNAG1000-HBR (0-200PPM) is suitable for real-time and accurate detection of hydrogen bromide gas concentration and leakage in various environments. The instrument adopts imported Electrochemical sensor and microcontroller technology, which has the advantages of fast Response Speed, High Measurement accuracy, Good Stability and Repeatability. It supports on-site alarm and early warning, 4-20mA standard signal output and relay switch output, and has a variety of circuit protection functions.
Features
1. Intrinsically safe circuit design, explosion-proof certification, two-level lightning protection, anti-static, anti-high-intensity pulse surge current Impact, High Reliability and Stability.
2. Standard bus RS485 and 4~ 20mA standard signal output simultaneously, optional Frequency output, Hart protocol signal, wireless transmission, etc., support wired or wireless remote real-time monitoring.
3. Compatible with various secondary meters, data collection modules, PLC, DCS systems, can directly drive solenoid valves, fans, alarms and other equipment.
4. Standard infrared remote control, to achieve dangerous situations without opening the lid operation, such as modifying the alarm point, concentration calibrating.
5.2.5 inch high definition color screen display real-time concentration, temperature, Humidity.
6. Automatic zero tracking to prevent drift, temperature compensation, multi-level calibrating, in line with national standards and local Measurement Bureau standards.
Principle
Electrochemical sensor is used to detect the concentration of hydrogen bromide gas by diffusion Sampling method. The sensor converts the gas concentration into an electrical signal, which is processed by a microcontroller and outputs a standard signal to realize real-time monitoring and alarm functions.
Applications
Petroleum and petrochemical, chemical plants, smelters, steel plants, coal plants, thermal power plants, scientific research, production workshops, Tobacco companies, environment monitoring, school scientific research, building construction, fire alarm, sewage treatment, industrial gas process control, boiler room, waste treatment plant, tunnel construction, oil pipeline, gas station, underground gas pipeline maintenance, indoor air mass detection, dangerous place safety protection, aerospace, military equipment monitoring
Standards
EMI, EMC Standard, National Standard Testing, CMC Measurement Equipment License Certification, GB 3836.1 - 2010, GB 3836.2 - 2010, GB 3836.4 - 2010
Steps
1. Install fixed equipment at the detection point.
2. Connect the power supply and output interface.
3. Use the infrared remote control for parameter setting, such as alarm point modification, calibrating, etc.
4. Start the device, warm up for 10 seconds, and start real-time monitoring.
5. Monitor gas concentration via display or remote system.
Notice
• Ensure that the Working Ambient Temperature is in the range of -30~ 50 ℃.
• Avoid use under condensation conditions. Operating humidity is 0~ 95% RH non-condensation.
• Pay attention to explosion-proof requirements during installation and meet relevant standards.
• Regular calibrating and maintenance to maintain accuracy.
• Use an infrared remote control when operating in dangerous places to avoid opening the lid.
• Power supply voltage is checked to meet DC5V +/- 1% or DC24 +/- 1% requirements.
