Overview
The NIRUN DC0506 Thermostatic bath is a precision thermostatic device with a Temperature range of -5 to 100 ° C, with a 6L Tank volume, made of stainless steel, suitable for water and oil media, providing a stable and uniform temperature field.
Features
1.5 inch wide Touchscreen control, integrated display of current temperature, Measurement time, temperature correction and other information, easy to operate.
2. Intelligent Software Temperature Stability, PID can automatically adjust parameters according to the medium, special users can manually adjust.
3. Effective PID refrigeration/fully enclosed Compressor unit refrigeration, with fast cooling speed and multiple protections such as overheating and overcurrent.
4. Professional domestic circulation and external circulation system, domestic circulation makes the temperature uniform and stable, the external circulation pump outputs thermostatic liquid to establish the second thermostatic field outside the machine, which can be used as a cold source to chill down the external experimental container.
5. The countertop and inner tank are high-mass stainless steel, corrosion resistance, water and oil media can be used, wide applicability, easy to clean.
Principle
Thermostatic bath automatically adjusts the temperature through the intelligent PID Control system, uses the domestic circulation system to maintain the uniform and stable temperature in the tank, and establishes an external thermostatic field by outputting thermostatic liquid through the external circulation pump to achieve rapid cooling and accurate temperature control.
Applications
Laboratory thermostatic test, external test vessel chilled down, temperature calibrated, material test
Steps
Connect the power supply and ensure that the voltage is 220V and 50Hz.
2. Set the target temperature and Miscellaneous parameters through the 5-inch Touchscreen.
3. Start the equipment, the domestic circulation system automatically runs to stabilize the temperature.
4. If you need to chill down externally, enable the external circulation pump to output thermostatic liquid.
5. Monitor the temperature and time information displayed on the screen and adjust the parameters if necessary.
Notice
• Power supply voltage check before use to 220V, 50Hz requirements.
• Ensure that the Tank Level does not exceed 140mm.
• Avoid operating under overheating or overcurrent conditions. The equipment has a protective function but still requires attention.
• Use mild detergent when cleaning to avoid corrosion of stainless steel surface.
• Special users should be careful when adjusting PID parameters to avoid affecting Temperature Stability.
