Overview
The LABTOP CC-2008W thermostatic circulator is a Benchtop temperature control device that integrates heating and cooling functions. Its compact design is easy to use on a desktop. The device can achieve precise temperature control in the range of -20 ° C to 150 ° C. It is suitable for high and low temperature thermostatic and programmed temperature rise and drop tests of samples. It can be matched with instruments such as Viscometer to facilitate experimental operation and data observation.
Features
1. Appearance compact, small size, convenient desktop placement.
2. With external temperature control and programmable functions, support automatic heating, thermostatic, cooling test.
3. Support 10-stage program control to meet the needs of timing thermostatic, heating and cooling.
4. When paired with Viscometer, the operation and display interface layout is reasonable, and the testing process is clear at a glance.
5. Standard two heightening racks, suitable for sample cups of different sizes.
6. Standard two insulation tubes, easy to conduct external circulation water bath jacket thermostatic viscosity test.
7. With both heating and cooling functions, Temperature range -10 ° C to 220 ° C (Note: According to specifications, CC-2008W models are actually -20 ° C to 150 ° C).
8. Equipped with a low-level buoy alarm, dual light and sound reminders to prevent dry burning.
9. Adopt maintenance-free pressure/suction pump, Pump Power, Horizontal and vertical stirring, Temperature uniformity in the tank is good, support internal and external circulation applications.
10. Large opening design, can be placed directly in the tank container reaction, or use tuberack for multiple samples thermostatic.
11. Pump pressure and Flow rate automatically adapt to external load, using international standard M16x1 connecting nut, can be configured with different joints.
12. The parts that come into contact with liquid or steam are made of high-performance stainless steel and plastic, which are resistant to corrosion and scale.
13. Use fluorine-free and environmentally friendly refrigerants.
14. Multiple operation modes are optional, and accidental power failure can be automatically restored.
15. Optional intelligent control functions (such as RS485 and RS232 interfaces) enable remote communication and equipment start-stop control.
16. Optional 0-10V or 4-20mA analog signal input, support external smart devices to control the start and stop of the instrument.
Principle
The thermostatic circulator achieves precise control of the temperature of the bath liquid in the Tank through the built-in heater and cooling system combined with the High Accuracy Pt100 temperature sensor for temperature detection and feedback. It is equipped with a powerful circulation pump to stir the bath liquid to ensure a high degree of uniformity in the tank. The device supports program control, which can automatically perform the rising and cooling process according to the preset temperature Linear dispersion, and provides a stable temperature environment for the tested sample or external jacket through domestic circulation or external circulation.
Applications
Rotor Viscometer, Rotational Viscometer, cone-plate viscometer for sample viscosity testing in the bath, rotor Viscometer, Rotational Viscometer, cone-plate viscometer for sample viscosity testing in the water bath jacket outside the bath, high and low temperature reaction process temperature control in the bath, quality control such as temperature sensor calibrating, etc
Notice
• Before use, please ensure that the Power supply voltage (200~ 230 VAC/50Hz) and Environmental requirements (temperature 5~ 32 ℃, relative humidity ≤ 80%) comply with the regulations.
• Pay attention to observe the liquid level to prevent the alarm from being triggered or dry burning due to the low liquid level.
• When connecting the external circulation, please select the appropriate connector according to the pipe diameter requirements and ensure that the connection is firm.
• When the equipment is running, do not block the ventilating port and ensure that there is enough heat dissipation space around.
• When cleaning and maintaining, please use a suitable detergent to avoid damaging the surface of the corrosion-resistant material.
