Overview
JPSJ-606L dissolved oxygen meter is a professional instrument of LEICI brand, mainly used for tap water source monitoring, aquaculture farms, environmental protection, sewage treatment plants, beverage industry and R & D institutions to determine the dissolved oxygen content or concentration of water.
Features
1.7-Inch Color Touchscreen, Navigation Operation
2. Support measurement of dissolved oxygen concentration, dissolved oxygen Saturation, dissolved oxygen current and temperature value
3. Intelligent Operating system, with method management, Electrode management, calibrating management, data management and user management functions
4. Support Electrode management, up to 5 dissolved Oxygen electrodes can be managed, each Electrode can save 20 sets of correction records; support calibrated editing function
5. Support zero oxygen and fullness correction, support atmospheric pressure and temperature automatic compensation, support self-stirring dissolved Oxygen electrode
6.3 reading modes: Smart-Read, Timed-Read, Cont-Read
7. Support storage of up to 100 Measuring methods; support storage of dissolved oxygen concentration and dissolved oxygen Saturation measurement results of 1000 sets each, in line with GLP specifications; with data statistics function
8. Support USB, RS232 connection to PC, serial printer; allow printing out measurement results
9. Support Chinese and English languages; support firmware upgrade, support U disk hot swap; support direct connection Automatic sampler
Principle
The instrument detects the dissolved oxygen content in the water body through the dissolved Oxygen electrode, supports automatic compensation of atmospheric pressure and temperature, and ensures measurement accuracy. A variety of reading modes are used, including Smart-Read, Timed-Read and Cont-Read, to adapt to different measurement needs.
Applications
Water source monitoring, aquaculture farms, environmental protection, sewage treatment plants, beverage industry, R & D institutions
Standards
GLP specification
Steps
1. Turn on the instrument and select Measurement mode
2. Electrode calibrated (support zero oxygen and fullness correction)
3. Set the reading mode (Smart-Read, Timed-Read, or Cont-Read)
4. Electrode immersion in water sample to be tested
5. Read and record measurement results
6. Data output can be connected to a PC or printer via USB or RS232
Notice
• Electrode intact and properly calibrated before use
• Pay attention to atmospheric pressure and temperature compensation settings during measurement
• Avoid long-term use of Electrode in extreme temperature environments
• Check Electrode status regularly and replace if necessary
• Follow GLP specification requirements when storing data
