Overview
LEICI KLS-411 Moisture Analyzer is a precision analytical instrument using the principle of coulomb method, suitable for the determination of trace moisture samples such as organic solvents and oils. The instrument has a large-screen LCD display, simple operation, high Degree of automation, and can measure moisture in the range of 10μg to 20mg.
Features
1. Large LCD display, simple operation, High Degree of automation
2. It can measure the moisture content of 10μg~ 20mg
3. Using Coulomb method, using membrane Electrode, suitable for the determination of organic solvents, oils and other trace moisture samples
4. LEICI odorless K-F Reagent with low toxicity, low pollution and repeated use
5. Reagents do not need to be calibrated
6. Support the storage, access and deletion of measurement results
7. Support RS232 interface, can connect to printer
Principle
The Moisture Analyzer uses the principle of Coulomb method to determine the moisture in the sample by electrolysis. When the moisture in the sample reacts with the Reagent, the instrument quantitatively analyzes the moisture through electrolysis current to achieve accurate measurement of trace moisture.
Applications
Determination of organic solvents, oils and other trace moisture samples
Standards
Measurement Repeatability: no more than 3%, Indication Error ： +/- （ 5% of the checkpoint + 3) μg, electrolysis current intrinsic error ： +/- 0.5% (reading), polarization current error: +/- 0.2 μA
Steps
1. Prepare samples and LEICI odorless K-F Reagent
2. Power on the instrument
3. Set electrolysis current parameters (10mA, 20mA, 50mA or 100mA)
Step 4 Conduct moisture determination
5. View, store or delete measurement results
6. Optional connection printer output result
Notice
• Power supply voltage is (220 +/- 22) V and Frequency is (50 +/- 1) Hz
• Please use the designated LEICI odorless K-F Reagent
• Measurement range should be controlled between 10μg~ 20mg
• The instrument weight is 3kg, please pay attention to safety when handling
Please store the measurement data properly after use
