Overview
The LEICI DGB-402A Portable residual chlorine total chlorine tester is a Portable water quality testing device with a high definition LCD screen display and 515nm LED Illuminant. It has built-in residual chlorine and total chlorine Measuring methods, supports Data storage, access and deletion functions, is powered by lithium batteries and has IP65 Protection Rating for rapid on-site testing.
Features
1. Adopt high definition LCD screen, clear display
2. Using 515nm LED Illuminant, long life, high accuracy
3. Measuring method of residual chlorine and total chlorine
4. Support built-in calibrated Linear dispersion and custom 1 point calibrated
5. Support Data storage (200 sets in total), access, delete
6. Lithium battery power supply, support connecting PC and mobile power supply charging
7. With battery power prompt function and charging status reminder function
8. Support backlight adjustment
9. IP65 Protection Ratings
10. Standard residual chlorine calibrated Reagent pack, residual chlorine/total chlorine Reagent pack, Portable protective box
Principle
The instrument uses a 515nm wavelength LED Illuminant to illuminate the sample and quantitatively analyze the residual chlorine and total chlorine concentrations by measuring the change in the sample's Absorbance to specific wavelengths of light. The instrument has built-in calibrated Linear dispersion, supports 1 point calibrated to ensure measurement accuracy, and uses a 25mm Colorimetric bottle as a measurement cell for detection.
Applications
Water quality testing, environment monitoring, drinking water safety, swimming pool water quality control, industrial water treatment
Standards
The product information does not mention specific compliance standards
Steps
1. Turn on and select Measurement mode (residual chlorine or total chlorine)
2. Perform 1 point calibrating operation
3. Prepare samples and use 25mm Colorimetric bottles
4. Colorimetric bottle into the measurement tank for measurement
5. Read and record measurement results
6. Optional storage of measurement data
7. Shut down after use
Notice
• Please ensure that the instrument is fully charged before use
• Reagent package for calibrating and measurement
• Colorimetric bottles should be cleaned before use
• Avoid direct light during measurement
• Regularly check the battery level and charge it in time
• Be careful not to exceed the 200-set limit when storing data
• Instruments should be stored in a drying environment
• Use the original Power Adapter when charging
