Overview
LEICI DJS-0.01 Conductivity detector Electrode is a titanium alloy shell Conductivity detector Electrode. Measurement range is 0~ 2μS/cm, suitable for use with Conductivity Meter. The product adopts three-core aviation plug design, Dimension is φ 18 * 50mm.
Features
1. Titanium alloy shell material, with good corrosion resistance performance
2. Measurement range 0~ 2μS/cm, suitable for low conductivity measurement
3. Three-core aviation plug design, reliable connection
4. Dimensions are small, easy to install and use
Principle
Conductivity detector Electrode reflects the conductivity value by measuring the conductive ability of ions in the solution. When the Electrode is immersed in the solution, an electric field is generated between the Electrodes, and the conductivity of the solution is calculated by measuring the relationship between current and voltage.
Applications
Water quality monitoring, laboratory analysis, industrial process control
Steps
1. Connect the Electrode Three-core Aviation Plug with the corresponding interface of the Conductivity Meter
2. Electrode immersion in the solution to be tested
3. Turn on the Conductivity Meter for measurement
4. Read and record measurement results
5. Electrode cleaning and storage after measurement
Notice
• Please confirm that the Electrode matches the instrument before use
• Avoid Violent Impact or Drop of Electrode
• Electrode should be cleaned in time after measurement
• When not in use for a long time, it should be stored according to the specified method
• Do not use in solutions beyond the Measurement range
