Overview
LEICI DJS-1D Conductivity detector Electrode is a platinum black material Conductivity detector measurement device with a Measurement range of 2-20000 μS/cm, suitable for a variety of Conductivity Meters. The Electrode uses a Glass shell, Dimension is φ 12 * 120mm, and is equipped with a three-core aviation plug interface.
Features
1. Using Platinum Black Material to Improve Measurement accuracy and Stability
2. Glass shell design, good corrosion resistance performance
3. Three-core aviation plug interface, reliable connection
4. Measurement range 2-20000μS/cm
Principle
Conductivity detector Electrode reflects the concentration of ions in a solution by measuring the conductivity of the solution. When the Electrode is immersed in the solution, the current between the Electrodes passes through the solution, and the conductivity value is calculated according to Ohm's law. Platinum black materials increase the surface area of the Electrode and improve the measurement Sensitivity and accuracy.
Applications
Water quality monitoring, laboratory analysis, industrial process control, environment monitoring
Steps
1. Connect Electrode Three-core Aviation Plug with Matching Conductivity Meter
2. Electrode immersion in the solution to be tested
3. Record the Measured value after waiting for the reading to stabilize
4. Clean Electrode After Use and Store Properly
Notice
• Make sure Electrode is clean and free of contamination before use
• Avoid Violent Impact or Drop of Electrode
• Electrode is fully immersed in the solution during measurement
Periodically calibrated to ensure measurement accuracy
• Electrode drying during storage
