Overview
LEICI DJS-0.1L Conductivity detector Electrode is a precision instrument specially designed for conductivity measurement. Measurement range is 0.05~ 200μS/cm. It uses Glass shell and Mini-DIN 8 core connector. It is suitable for matching DZS-708L and DDSJ-319L Conductivity Meters.
Features
1. Using Platinum Electrode to Ensure Measurement accuracy and Stability
2. Glass shell design, corrosion resistant and easy to clean
3. Mini-DIN 8-core connector, reliable connection
4. Optimized for low conductivity measurements, covering the 0.05 to 200 μS/cm range
Principle
Conductivity detector Electrode is based on the conductivity Measurement principle, induces current changes in the solution through Electrode, converts conductivity into readable signals, and supports Conductivity Meter for data processing and display.
Applications
Water quality monitoring, laboratory analysis, industrial process control
Steps
1. Connect the Electrode to the Mini-DIN 8-pin interface of the matching Conductivity Meter
2. Immerse the Electrode in the solution to be tested to ensure complete coverage of the sensing part
3. Turn on the Conductivity Meter and wait for the reading to stabilize
4. Record the measurement results, clean the Electrode after use and store it properly
Notice
• Avoid Electrode in the drying state for a long time
Periodically calibrated to ensure measurement accuracy
• Use a soft cloth and appropriate solvent when cleaning to prevent damage to the Glass shell
• Electrode moisture during storage to prevent oxidation of platinum materials
