Overview
LEICI DJS-10C Conductivity detector Electrode is a professional Electrode for measurement conductivity. Measurement range is 2000~ 200000 μS/cm. Glass shell material, Dimension is φ 12 * 120mm, equipped with three-core aviation plug interface, suitable for supporting Conductivity Meter.
Features
1. Measurement range 2000~ 200000 μ S/cm
2. Glass shell material, good corrosion resistance
3. Compact shape design, size is φ 12 * 120mm
4. Three-core aviation plug interface, stable and reliable connection
Principle
Conductivity detector Electrode reflects the Ion concentration by measuring the conductivity of the solution. When the Electrode is immersed in the solution, the current conductivity between the Electrodes is proportional to the conductivity of the solution, and the measured value is detected and displayed by the matching Conductivity Meter.
Applications
Water quality monitoring, industrial process control, laboratory analysis
Standards
The product information does not mention specific compliance standards
Steps
1. Connect Electrode 3-core Aviation Plug to Matching Conductivity Meter
2. Electrode immersion in the solution to be tested
3. Record the Measured value after waiting for the reading to stabilize
4. Clean Electrode After Use and Store Properly
Notice
• Do not use outside the range of 2000~ 200000 μS/cm
• Avoid Violent Impact or Drop of Electrode
• It should be cleaned in time after use to prevent the solution from remaining
• Ensure that the Electrode plug is firmly connected to the instrument
• Electrode drying should be kept clean during storage
