Overview
LEICI DO-957 dissolve Oxygen electrode is a polarographic/Laminating type Electrode. Measurement range is 0.0-19 mg/L, suitable for water quality dissolved oxygen detection. The product adopts ABS shell material, Dimension is φ 12 * 120mm, equipped with small four-core aviation connector, and the supporting instrument is JPB-607A.
Features
1. Polarographic/Laminating design to ensure measurement accuracy
2. Measurement range covers 0.0-19 mg/L to meet common application requirements
3. ABS shell material, durable and lightweight
4. Small four-core aviation connector, stable and reliable connection
5. Compact, with a size of φ 12 * 120mm, making it easy to install and use
Principle
The Electrode operates on the principle of Polarography, isolating samples through a Laminating design for measurement of dissolved oxygen concentration in water. With the support of the companion instrument JPB-607A, the Electrode converts the electrical signal generated by oxygen molecules on the Electrode surface into a dissolved oxygen reading.
Applications
Water quality monitoring, environment testing, laboratory analysis, industrial process control
Steps
1. Connect Electrode to JPB-607A Instrument's Small Quad Air Plug
2. Electrode immersion in water sample to be tested
3. Turn on the instrument and wait for the reading to stabilize
4. Measured value of dissolved oxygen
5. Clean Electrode After Use and Store Properly
Notice
• Electrode to avoid severe impact or high temperature environment
• Regularly check Electrode diaphragm and replace it if damaged
• Ensure that the connection interface is clean and drying to prevent corrosion
Maintain water sample temperature in the range of 5-40 ° C during calibrating and measurement
• Electrode drying during storage to avoid prolonged exposure to air
