Overview
LEICI PF-2-01 Fluoride Ion Electrode (Plastic) is an Electrode product for the measurement of fluoride Ion concentration, using plastic shell material, suitable for laboratory and industrial Ion concentration detection.
Features
1. Single crystal sensitive film, Measurement accuracy
2. Plastic shell material design, good durability
3. Measurement range, up to 10-1~ 10-6mol/L
4. BNC (Q9) standard connector, strong compatibility
5. Operating temperature range (5-45 ℃)
Principle
The fluoride ion Electrode works based on the principle of ion selective Electrode, generates a selective Response to fluoride ions in the solution through a single crystal sensitive membrane, converts the Ion concentration into a potential signal, and performs measurement with a pH Meter or ion meter.
Applications
Water quality monitoring, environment testing, laboratory analysis, industrial process control
Standards
BNC (Q9) Interface standard
Steps
1. Connect the Electrode BNC connector to the matching pH Meter or ion meter
2. Electrode immersion in the solution to be tested
3. Wait for the measurement result to stabilize
4. Clean Electrode After Use and Store Properly
Notice
• Check if Electrode is in good condition before use
• Electrode fully immersed in solution during measurement
• Avoid use in environments beyond the specified Temperature range
• It should be cleaned and properly stored after use
Electrode calibrated regularly to ensure measurement accuracy
