Overview
LEICI 6801-01 Ion Electrode is an ion-selective Electrode with a Glass case and Glass-sensitive membrane for accurate measurement of a wide range of ions. The Electrode has a standard BNC (Type Q9) interface and can be connected to a matching pH Meter or ion meter.
Features
1. Glass Sensitive Film for Sensitive Response
2. Glass shell design, good corrosion resistance performance
3. Standard BNC (Q9 type) interface, strong compatibility
4. Operating temperature range 20-40 ℃, adapt to a variety of environments
5. Dimension small (φ 12 * 120mm), easy to operate
Principle
Electrode ion-selective membrane potential based on the principle of work, when immersed in a solution Electrode, the sensitive membrane and a specific ion in the solution in a selective Response, generating a potential signal associated with Ion concentration, the potential signal can be determined by measurement of the solution concentration of the corresponding ions.
Applications
Water quality monitoring, environment testing, laboratory analysis, industrial process control
Standards
BNC (Q9 type) Interface standard
Steps
1. Connect the Electrode BNC interface to the supporting instrument
2. Electrode immersion in the solution to be tested
3. Record the Measured value after waiting for the reading to stabilize
4. Clean Electrode After Use and Store Properly
Notice
• Check if Electrode is in good condition before use
• Electrode is fully immersed in the solution during measurement
• Operating temperature should be controlled within the range of 20-40 ° C
• Electrode should be cleaned promptly after use
• Avoid Violent Impact or Drop of Electrode
• When not in use for a long time, it should be stored according to the instructions
