Overview
LEICI 213-01 Platinum Electrode is a metal Electrode, Operating temperature range is 0-50 ℃, using platinum as the working Electrode material, Glass shell, Dimension is 12 * 120mm, equipped with BNC (Q9) connector, suitable for Titrator use.
Features
1. Using Platinum as Working Electrode Material with Good Chemical Stability and Conductivity
2. Glass shell design, corrosion resistance and high transparency
3. Operating temperature range, can work stably in 0-50 ℃ environment
4. Equipped with standard BNC (Q9) connectors, easy and reliable connection
5. Dimensions are small, easy to operate and install
Principle
The platinum Electrode is in contact with the tested solution through the platinum material on its surface, acts as a working Electrode during electrochemistry titration, responds to potential changes in the solution, converts chemical signals into electrical signals, and transmits them to the Titrator for measurement and analysis through the BNC connector.
Steps
1. Check whether the Electrode Appearance is in good condition to ensure no damage
2. Connect Electrode to the corresponding Titrator interface through the BNC (Q9) connector
3. Immerse the Electrode in the solution to be tested to ensure that the Electrode head is in complete contact with the solution
4. Set the corresponding parameters on Titrator and start the measurement program
5. After measurement, remove Electrode and clean with deionized water
6. Electrode storage to avoid collision and contamination
Notice
• Please check whether the Electrode is in good condition before use, and do not use it if it is damaged.
• Electrode Operating temperature range is 0-50 ℃, do not use in environments beyond this range
• Avoid the Electrode from being violently hit or dropped, so as not to damage the Glass shell
• Electrode should be cleaned in time after use to prevent solution residue from affecting the next Measurement accuracy
• Electrode drying should be kept clean during storage to avoid contact with corrosion substances
• When connecting the BNC connector, please align the interface to avoid damage caused by excessive force
