Overview
AISRY ASR-1021 (200KG) touch screen single column tensile strength testing machine is a kind of equipment suitable for mechanical performance testing of various materials. It is mainly used to test the tensile strength, Peel Strength, deformation rate, breaking force, disbonding force, opening force and other key performance indicators of Plastic film, Composite film, Adhesive, Adhesive tape, medical patch, protective film, release paper, rubber, artificial leather, paper fiber and other products.
Features
1. Adopt touch screen operation, the interface is intuitive and convenient.
The capacity is 200 kilograms, and the force value resolution is high, reaching 1/200,000.
3. The test speed range is wide, ranging from 0 to 300mm/min, with an effective stroke of 600mm.
4. Provide a variety of force values and stress units to meet the requirements of different testing standards.
5. With upper and lower limit safety settings and test breakpoint sensing and other shutdown methods.
6. Equipped with a micro printer, it can directly output test results.
7. Adopt a speed-regulating motor as the power system for smooth operation.
Principle
The testing machine applies tensile or disbonding force to the specimen by driving the transmission system through a speed-regulated motor. The Force Sensor detects the applied force value in real time, and the Displacement Sensor measures the deformation and displacement of the specimen. The control system tests according to the set parameters (such as speed, stop conditions), and finally calculates the tensile strength, Peel Strength and other performance data.
Applications
Adhesive Tape, Automotive, Pottery and porcelain, Composites, Construction, Food Equipment, Metal, Paper, Encasement, Rubber, Spinning & weaving, Wood, Communication and Various Shaped Materials
Standards
The data did not mention specific compliance criteria.
Steps
Connect the power supply (1PH, AC220V, 50/60Hz).
2. According to the test requirements, install the appropriate tensile fixture.
3. Set test parameters on the touch screen, such as test speed, force unit, shutdown mode, etc.
4. Clamp the specimen correctly on the fixture.
5. Start the test, and the equipment will automatically run until the shutdown conditions are reached (e.g., the sample breaks, the upper limit of the force value is reached, etc.).
6. After the test is completed, print the test results through a micro-printer.
7. Turn off the power and clean the test area.
Notice
* Power supply voltage meets equipment requirements (1PH, AC220V, 50/60Hz).
* The weight of the equipment is about 40kg, and attention should be paid to safety when moving and installing.
Select the appropriate fixture according to the test material and ensure that the clamping is firm.
Before testing, please set the upper and lower safety limits correctly to prevent overload damage to the equipment.
* Regularly maintain and calibrate equipment to ensure test accuracy.
Non-professional personnel should not disassemble or repair the equipment without authorization.
