Overview
AISRY ASR-7200 midsole fiber folding tester is a professional equipment used to test the bending resistance of midsole fiberboard in leather shoes, casual shoes, walking shoes and travel shoes.
Features
1. DC motor drive, stable operation.
2. Equipped with an LCD counter, the counting range is 0 to 999999, and the display is clear.
3. The fixture configuration is complete, with 6 upper fixtures and 6 lower fixtures with 2 +/- 0.1kg heavy load, allowing multiple sets of tests to be performed simultaneously.
4. The folding angle is 90 degrees left and right, and the folding speed can reach 60rpm, resulting in high testing efficiency.
Principle
The sample was continuously bent 90 degrees to the left and right until it broke. The number of breaks was used to determine the bending resistance index of the middle baseplate. As a basis for comparison, the middle baseplate was selected. Sampling requirements: A standard sample with a length of 80mm and a width of 10mm was cut from the finished fiberboard. Result determination: The number of breaks was used to determine the bending resistance index of the middle baseplate.
Applications
Midsole fiberboard torsion resistance test for leather shoes, casual shoes, walking shoes, and travel shoes
Steps
1. Cut a standard sample with a length of 80mm and a width of 10mm from the finished fiberboard.
2. Install the specimen between the upper and lower clamps.
3. Set up and start the device, and the specimen will begin to bend continuously back and forth.
4. The equipment automatically records the number of bending times when the specimen breaks.
5. Determine the bending resistance index of the baseplate according to the number of breaks recorded.
Notice
• The sample size must strictly meet the standard requirements of 80mm x 10mm.
• The weight and weight of the lower fixture must be 2 +/- 0.1kg.
• The power supply of the device is 1, AC220V, 5A, please make sure the power supply matches.
• Please pay attention to safety during operation and avoid touching moving parts.