Overview
The LABTOP UC10 chiller is a high-end model of the uChiller series designed for high-quality requirements. This model is equipped with a pressure regulating protection bypass valve and a complete protection and alarm system to meet the application needs of various industries; optional water purification configuration to ensure clean water quality; Provide a variety of alarm and output interfaces, including water pressure protection alarm and water flow alarm protection. The circulating pump can be equipped with an immersion pressure suction pump with low pressure and large Flow rate, and can also be equipped with other high-lift pressure pumps.
Features
1. High-performance circulating water pump, the circulating water system adopts multiple water purification designs to prevent impurities from entering the circulating pump system and prolong the service life of the pump.
2. Using professional PID control technology, high temperature control accuracy.
3. Adopt Pt100 temperature sensor.
4. Stable and reliable system: high-performance high-mass spare parts, stable mass, reliable performance.
5. Multiple safety protection: with temperature protection, water pressure protection, overheating and overcurrent protection, and can be alerted by light and sound at the same time when alarming.
6. The refrigeration series adopts imported Compressor and ultra-quiet fan, and the noise of the whole machine is very low, especially suitable for laboratory environment.
7. When alarming, the light and sound remind at the same time, and various alarm codes are directly displayed to directly determine the error point.
8. Adopt waterproof keyboard design and LCD display.
9. The maximum and minimum temperature settings of the machine can be limited.
Principle
The chiller drives the chilled down liquid through the circulation pump for domestic circulation in the system. PID control technology is used, combined with the Pt100 temperature sensor to accurately monitor the water temperature, and to achieve accurate and stable control of the water temperature by adjusting the working state of the refrigeration system (using imported Compressors). The multi-purification design ensures the circulating water quality, and the perfect Safety protection system (such as temperature, water pressure, overcurrent and overload protection) ensures the safe operation of the equipment through sound and light alarm and code display under abnormal circumstances.
Applications
Laboratory, high-quality temperature control demand areas in various industries
Steps
1. Ensure that the device is placed in an environment with Permissible Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%), and connected to the rated power supply (200~ 230VAC/50Hz).
2. Connect the required pipeline through the RC1/2 (4-point inner tooth) interface to ensure that the pump Flow rate is within the range of 2-20L/min.
3. Inject the appropriate chilling down liquid into the reservoir (volume 7L).
4. Use waterproof keyboard and LCD display to set the required Temperature range (5~ 35 ℃) and maximum/minimum temperature limit.
5. Start the device, the system will automatically adjust to the set temperature through PID control, and maintain the temperature Stability of +/- 0.1 ℃.
6. The equipment can operate 100% continuously, and the status can be monitored through the display screen during operation. If there is an alarm, it will be prompted by lights and sounds and display BigInt.
Notice
* Please ensure that the device operates at the allowable Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%).
The connection power supply must meet the rated requirements (200~ 230VAC/50Hz).
* The maximum pressure of the pump is 1.5bar, and the maximum Flow rate is 4.0L/Min. Do not exceed this range when using.
* The device is Floor-Standing fixed, please ensure a smooth placement.
* When an alarm occurs, please directly determine the error point and deal with it according to the displayed alarm code.
* Pay attention to distinguish the model suffix, without "F" for Air-Cooled integrated type, with "F" for cold split.
When setting the temperature, please ensure that it is within the maximum and minimum temperature limits that the machine can set.
