Overview
The LABTOP IC350 chill down circulating water machine is one of the general-purpose chill down circulating water machine IC series, which belongs to the Air-Cooled all-in-one machine. This series of products is widely used, and the small model can be used to support the chill down of laboratory equipment. The IC350 has a cooling capacity of 35000W, uses a brand-name Compressor, a silent fan and a silent pump, and works quietly, making it suitable for applications in quiet environments. The device provides a variety of Communication interfaces and analog/switching input and output, supports remote control and status query, and provides an alarm output for external master devices to ensure safety.
Features
1. The LCD screen displays the actual temperature, set temperature and return difference at the same time, which is clear at a glance. The keyboard is automatically locked when the button operation expires.
2. A variety of pressure pumps are available, and the output pressure of the pump is adjustable, which can meet a variety of applications with different pressures and different Flow rates.
3. With pump standby antifreeze function.
4. The switch can be remotely controlled.
5. Use brand Compressor, silent fan and silent pump, quiet when working, suitable for applications in quiet environment.
6. The refrigeration system has high voltage protection and overcurrent protection functions to prevent Compressor overload and effectively protect the Compressor.
7. When alarming, the light and sound are reminded at the same time, and various alarm codes are directly displayed to directly determine the cause of the failure and the repair method.
8. Caster design for easy machine movement.
Principle
The LABTOP IC350 chill down circulating water machine is an Air-Cooled all-in-one machine that dissipates heat through a fan. Its Working Principle is to remove the heat of the circulating water through the refrigeration system (including components such as Compressor), thereby reducing the water temperature to the set range. The device monitors and sets the temperature through the LCD screen, and has multiple protection functions to ensure the stable operation of the system. At the same time, it can realize linkage control with external devices through the Communication interface.
Applications
General chilled down, laboratory equipment chilled down
Steps
1. Place the equipment in a suitable location with Permissible Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%), and ensure that it is well ventilated.
Connect the power supply (200~ 230VAC/50Hz).
3. Connect the chilled down water circulation pipeline through the equipment interface (4 points inner teeth), which can be matched with joints and pipes of different specifications.
4. Set the required temperature (Temperature range 5~ 35 ℃) and Miscellaneous parameters on the LCD screen.
5. Start the device and observe the actual temperature, set temperature and other parameters on the LCD screen to ensure normal operation.
6. The equipment can operate continuously (allowing 100% continuous operation), and the status can be monitored through the display screen or controlled and inquired through the remote interface during operation.
7. After use, shut down according to the prescribed procedures.
Notice
Equipment should be placed in Ambient Temperature 5~ 32 ℃, relative humidity ≤ 80% conditions.
• Ensure that the equipment is well ventilated, especially the Air-Cooled model, to ensure the heat dissipation effect.
When connecting the power supply, make sure the voltage is 200~ 230VAC/50Hz and ensure good grounding.
• When connecting the circulation pipeline, please ensure that the interface (4-point inner teeth) is well sealed to prevent leakage.
• Do not cover or block the cooling fan and entry and exit trends when the device is running.
• When the equipment alarms, please determine the cause of the failure according to the alarm code prompt on the display screen and take corresponding repair measures.
• When moving the device, casters can be used, but make sure the ground is flat and avoid violent vibration or tilt.
• Regularly inspect and maintain equipment to ensure its long-term stable operation.
