Overview
The LABTOP IC220W is a universal Water-Cooled chilled down circulating water machine belonging to the IC series. The device adopts Water-Cooled heat dissipation mode, has the characteristics of no indoor heat discharge and low noise, and is an environment-friendly product. It provides a variety of Communication interfaces and analog/switching input and output functions, supports remote control and status query, and can control and protect external devices.
Features
1. Adopt LCD screen, which can display the actual temperature, set temperature and return difference at the same time. The operation is intuitive, and the keyboard is automatically locked when the button operation expires.
2. Provide a variety of pressure pumps to choose from, and the pump output pressure can be adjusted to meet the application requirements of different pressures and Flow rates.
3. Equipped with standby antifreeze function of water pump.
4. Support remote control of the switch machine.
5, using brand Compressor, silent fan and silent pump, quiet work, suitable for quiet environment.
6, refrigeration system with high voltage protection and overcurrent protection function, effectively prevent Compressor overload, protect Compressor.
7. When alarming, the light and sound are reminded at the same time, and the alarm code is directly displayed, which is convenient for quickly determining the cause of the failure and the repair method.
8. Adopt caster design to facilitate machine movement.
Principle
The chilled down circulating water machine drives the refrigeration cycle through the Compressor, and takes the heat generated by the equipment away through the Water-Cooled cooling system to achieve temperature control of the chilled down liquid. The Water-Cooled design uses water instead of a fan to dissipate heat, thus avoiding indoor heat accumulation and noise problems. The device monitors the water temperature through a temperature sensor and the cooling capacity is adjusted by the Control system to maintain stability within the set Temperature range.
Applications
The general-purpose chilled down circulating water machine is widely used, and the miniature machine can be used for the matching chilled down of laboratory equipment.
Steps
1. Place the device in a suitable location and connect it to a power supply (200 to 230VAC/50Hz).
2. Connect the chilled down water inlet and outlet pipeline (the interface size is 4 points inner teeth, which can be matched with different specifications of joints and pipes).
3. Set the required temperature and parameters through the LCD display.
4. Start the equipment and observe whether the operating status and temperature display are normal.
5. During the operation of the device, it can be controlled or queried through the remote interface.
6. After use, shut down and disconnect the power supply according to the procedures.
Notice
• The equipment is allowed to operate continuously at 100%, but it is necessary to ensure that the Ambient Temperature operates within the range of 5~ 32 ° C and the relative humidity ≤ 80%.
• Note that the pump has a standby antifreeze function, and pay attention to this function status in a low temperature environment.
Equipment with high voltage and overcurrent protection, please check the fault in time according to the displayed code when alarming.
• Use casters when moving your device and be careful to avoid collisions.
• To ensure the safety of external devices, the device provides an alarm output, please connect it correctly and take advantage of this function.
