Overview
The LABTOP CC-0517 Pro calibrated Thermostatic bath is a precision temperature control device with a vertical design, suitable for desktop calibrated testing. Temperature range is -5~ 100 ℃, using High Accuracy 4-wire Pt100 temperature sensor, temperature Stability up to +/- 0.01 ℃, LCD touch screen operation, real-time display of set temperature, actual temperature, reference temperature and machine status. The device is particularly suitable for experimental and factory applications with high temperature accuracy requirements.
Features
1. Compact size, horizontal design, especially suitable for desktop calibrating test.
2. Maintenance-free pressure/suction pump, which can carry out horizontal and vertical two-way stirring of the bath liquid to improve Temperature uniformity.
3. Equipped with low liquid level protection function, it can be alerted by light and sound at the same time when alarming.
4. Parts that come into contact with liquids or vapors are made of high-performance stainless steel and plastics.
5. Adopt Pt100 temperature sensor, support single point and two point temperature calibrating.
6. It can be circulated inside and outside, and the black body with left and right handles is standard, which is convenient for pick and place and installation.
7. The buzzer can be set to either sound or silent mode.
8. The device serial number can be queried through the software.
9. Provide a variety of operation modes, which can be automatically restored after unexpected power failure.
10. Optional 0-10V or 4-20mA analog signal input, support external smart devices to control start and stop.
Principle
Calibrate Thermostatic bath uses jet technology to force circulation of the medium in the bath through the internal circulation system to achieve rapid and uniform distribution of temperature in the bath. The High Accuracy Pt100 Sensor monitors the temperature in real time, and the Control system precisely adjusts the Heating power based on feedback to maintain the set temperature and ensure excellent temperature Stability and uniformity.
Applications
Government Measurement Department, Social Measurement Agency, ** equipment inspection department, electronic component testing, aerospace, experiments and factories that require high temperature accuracy
Steps
Place the device on a stable desktop with Permissible Ambient Temperature (5~ 32 ° C) and Humidity (≤ 80%), and connect it to a 200~ 230VAC/50Hz power supply.
2. Add an appropriate amount of bath liquid to the Tank, pay attention to the liquid level, and avoid triggering a low liquid level alarm.
3. Set the required temperature and Miscellaneous parameters (e.g. buzzer mode) through the LCD touch screen.
4. Start the equipment, start the internal pump, and stir the bath liquid horizontally and vertically.
5. After the actual temperature stabilizes at the set value, calibrating or testing can be carried out.
6. After use, turn off the device according to the procedures.
Notice
* Please ensure that the device works at the allowable Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%).
Please check the liquid level of the bath before use to avoid alarming or damaging the equipment due to low liquid level.
* The power requirements of the equipment are 200~ 230VAC/50Hz, please ensure that the voltage matches.
* When moving or removing the standard black body, please use its left and right handles to ensure safe operation.
* The parts in contact with the bath are specific materials, do not use incompatible chemical media to avoid corrosion.
The device has a power-off recovery function, but when it restarts after an unplanned power outage, it is still necessary to check the operating status.
