Please contact customer service
All stainless steel Tank body and aluminum silicate cotton insulation, Temperature range up to -20 ℃ to 150 ℃, equipped with maintenance-free pressure/suction pump and Pt100 Sensor, support multi-stage program control and external Communication interface, with hardware over-temperature protection and a variety of power failure recovery mode.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030856
Service :The delivery and service By NBCLab.Com
The BC210E bath thermostatic circulator is a thermostatic circulator with heating head. With the help of external circulating water or chilled down liquid tank, the temperature can reach room temperature or -20 ℃. The bath body is made of all stainless steel, and the outside is filled with aluminum silicate cotton insulation, which provides an economical solution for the sample to be placed directly in the water bath for thermostatic test. Optional external circulation adapter and external temperature sensor PT100 can be used for external temperature control and circulation application. Suitable for temperature control, material testing, quality control, analysis of samples, etc. Use environmentally friendly natural refrigerant with liquid level protection and over-temperature protection functions.
1. Hardware over-temperature protection, users can set the protection temperature through the knob, and dry burning can still be avoided when the equipment program fails. It meets the DIN12876 standard level III and can use flammability bath liquid. 2. Maintenance-free pressure/suction pump, pump pressure and Flow rate automatically adapt to external load. 3. Optional multi-stage programmable controller, users can realize multi-stage program control, such as regular heating, cooling, thermostatic, slope and each period of time, each program can set the running time, up to 999 hours. 4. Equipped with external temperature sensor interface, optional movable external temperature sensor, with professional PID TAC control technology, Cascade cascade control technology and bath internal and external temperature lock control technology, can accurately control the bath external material temperature. 5. Pt100 temperature sensor, single point, two point and multi point temperature calibrating. 6. Parts that come into contact with liquids or vapors are made of high-performance stainless steel and high-performance plastics. 7. Optional related accessories are available for different internal and external applications. 8. The buzzer can be set to silent or audible. 9. Multiple operation modes are optional, and accidental power failure can be automatically restored. 10. The device serial number can be queried through the software. 11. Optional intelligent control functions: a variety of interfaces (RS485, RS232) to achieve remote communication and control the start and stop of equipment. 12. Optional normally open and normally closed 2 external contact points, can be connected to external alarms. 13. Optional set of 12V switch Output signal for controlling external solenoid valve. 14. An optional set of 5V external input switch signals can be used for external smart devices to control the start and stop of the instrument. 15. Optional 0-10V or 4-20mA analog signal input can be used for external smart devices to control the start and stop of the instrument.
The thermostatic circulator is heated by a built-in heating head and cooled down to room temperature or -20 ° C with the help of a chill down coil and an external circulating water or chill down tank. Its intelligent PID Control system, combined with a Pt100 temperature sensor, precisely monitors and regulates bath temperature. The pressure/suction pump automatically adapts to external loads, ensuring stable circulation. Precise control of the temperature of the material outside the bath can be achieved through an optional external temperature sensor and cascade control technology.
Sample temperature control, material testing, quality control, analysis
DIN 12876
1. Place the device on a stable countertop and connect it to a power supply (200~ 230VAC/50Hz). 2. Add an appropriate amount of water or chilled down liquid to the bath to ensure that the liquid level meets the requirements. 3. Set the required temperature, protection temperature, and Miscellaneous parameters (if applicable) through the control panel. 4. Connect external circulation pipelines or optional external Sensors, adapters and other accessories as needed. 5. Start the device and observe the temperature display and operating status to ensure stability. 6. Place the sample to be tested in the bath or connect it to an external circulation system. 7. During the operation of the equipment, it can be monitored and adjusted through the panel or optional remote interface. 8. After use, turn off the power of the device and clean the bath.
• Permissible Ambient Temperature of the equipment is 5~ 32 ℃, relative humidity ≤ 80%, please ensure that it is used in a suitable environment. • Before use, please confirm that the Power supply voltage is 200~ 230VAC/50Hz and ensure good grounding. • Use the recommended water or chilled down solution in the bath to avoid corrosion or incompatible liquids. • The equipment has liquid level protection and over-temperature protection functions, but it is still necessary to check the liquid level and operating status regularly to prevent dry burning. • Before moving or cleaning equipment, always disconnect the power supply and wait for the equipment to completely chill down. • Optional accessories should be selected according to actual application requirements, and installed and used correctly according to the instructions. • Equipment meets Safety level III/FL and can use flammability liquids, but still operate away from open flames and heat sources. • If the equipment is not used for a long time, drain the liquid in the bath and store it properly.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
