Please contact customer service
Temperature range up to -20 ℃, Temperature Fluctuation +/- 0.05~ 0.1K, with hardware over-temperature protection, maintenance-free pressure pump and multi-stage program control function, support external temperature sensor accurate temperature control.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030862
Service :The delivery and service By NBCLab.Com
The LABTOP BC327E bath thermostatic circulator is a thermostatic circulator with heating head. With the help of external circulating water or chilled down liquid tank, the temperature can reach room temperature or -20 ° C. The bath body is made of all stainless steel and filled with aluminum silicate cotton insulation, providing an economical solution for the sample to be placed directly in the water bath for thermostatic test. Optional external circulation adapter and external temperature sensor PT100 can be used for external temperature control and recycling applications, suitable for sample temperature control, material testing, quality control, analysis and other fields.
1. Hardware over-temperature protection, the user can set the protection temperature through the knob, in the case of equipment program failure, it can still be over-temperature protection to avoid dry burning, in line with DIN12876 standard level III, flammability bath liquid can be used. 2. Maintenance-free pressure/suction pump, pump pressure and Flow rate automatically adapt to external load. 3. Optional multi-stage programmable controller, the user can realize multi-stage program control, such as regular heating, cooling, thermostatic, slope and each period of time, each program can set the running time, the maximum time of each period is 999 hours. 4. Equipped with external temperature sensor interface, optional movable external temperature sensor, with professional PID TAC control technology, Cascade cascade control technology and bath internal and external temperature lock control technology, can accurately control the bath external material temperature. 5. Pt100 temperature sensor, single point, two point and multi point temperature calibrating. 6. Parts that come into contact with liquids or vapors are made of high-performance stainless steel and high-performance plastics. 7. Optional related accessories are available for different internal and external applications. 8. The buzzer can be set to silent or audible. 9. Multiple operation modes are optional, and accidental power failure can be automatically restored. 10. The device serial number can be checked by software. 11. Optional intelligent control functions: a variety of interfaces (RS485, RS232) to achieve remote communication and control the start and stop of equipment. 12. Optional normally open and normally closed 2 external contact points, can be connected to external alarms. 13. Optional set of 12V switch Output signal for controlling external solenoid valve. 14. An optional set of 5V external input switch signals can be used for external smart devices to control the start and stop of the instrument. 15. Optional 0-10V or 4-20mA analog signal input can be used for external smart devices to control the start and stop of the instrument.
The device is a thermostatic circulation unit that is heated by a built-in heating head and cooled down by means of a chill down coil and an external circulating water or chill down tank, thus controlling the temperature in the bath within a set range. Its intelligent PID Control system combined with the Pt100 temperature sensor ensures precise and stable temperature. The pressure/suction pump automatically adapts to external loads to circulate the liquid in the bath.
Sample temperature control, material testing, quality control, analysis
DIN 12876
1. Place the device on a stable countertop and connect it to the power supply. 2. Add an appropriate amount of working liquid (such as water or chilling down liquid) to the bath. 3. Set the required temperature, protection temperature, and Miscellaneous parameters (if applicable) through the control panel. 4. Connect external circulation line or external temperature sensor as required. 5. Start the equipment, the equipment will start heating or chilling down until the set temperature is reached and maintained. 6. Put the sample to be tested in the bath for thermostatic test. 7. After the test, power off the equipment, remove the sample, and drain the bath as needed.
• Permissible Ambient Temperature of the equipment is 5~ 32 ℃, relative humidity ≤ 80%, please ensure that it is used in a suitable environment. • Before use, please confirm that the Power supply voltage is 200~ 230VAC/50Hz and ensure good grounding. • The liquid level in the bath needs to be kept within a reasonable range, and the equipment has a liquid level protection function, but it is still necessary to pay attention to observation. The device has a hardware overtemperature protection function, but users still need to set the protection temperature correctly and check it regularly. • When using flammability baths, ensure that the equipment meets the safety requirements of DIN12876 standard level III. • The maximum pressure of the pump is 0.3 bar, and the maximum suction force is 0.2 bar. Please do not use it beyond the limit. Equipment is allowed to operate continuously, but it is recommended to check the operating status regularly during long-term operation. • When cleaning or maintaining, please disconnect the power supply first and avoid liquids from entering the internal circuit of the device. • When selecting external control functions (such as RS485, external touch points, analog signals, etc.), please connect correctly according to the instructions. When handling or moving equipment, please pay attention to its Dimensions (330 * 540 * 450mm) and weight to avoid dumping.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
