Please contact customer service
Temperature range up to -20 ℃ to 220 ℃, Temperature Fluctuation +/- 0.01~ 0.05K. Using pressure/suction pump, Flow rate 12L/min, with hardware over-temperature protection, multi-stage program control and external Communication interface, support external materials accurate temperature control.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030864
Service :The delivery and service By NBCLab.Com
The BC213 bath thermostatic circulator is a thermostatic circulator with heating head from the LABTOP BC series. It uses an external circulating water or chill down tank, and coils to chill down the coil, and the temperature can reach room temperature or as low as -20 ° C. The bath body is made of all stainless steel and filled with aluminum silicate cotton insulation, which provides an economical solution for the sample to be placed directly in the water bath for thermostatic test. Optional external circulation adapter and external temperature sensor PT100 can realize external temperature control and circulation applications. It is suitable for sample temperature control, material testing, quality control, analysis and other fields. It uses environmentally friendly natural refrigerants and has liquid level protection and over-temperature protection functions.
1. Hardware over-temperature protection, users can set the protection temperature through the knob, and dry burning can still be avoided when the equipment program fails. It meets the DIN12876 standard level III and can use flammability bath liquid. 2. Maintenance-free pressure/suction pump, pump pressure and Flow rate automatically adapt to external load. 3. Optional multi-stage programmable controller, can achieve multi-stage program control, such as timing heating, cooling, thermostatic, slope and each period of time, the longest time 999 hours. 4. Equipped with external temperature sensor interface, optional movable external temperature sensor, with PID TAC control, Cascade cascade control and bath temperature difference lock control technology, precise control of external material temperature. 5. Pt100 temperature sensor, single point, two point and multi point temperature calibrating. 6. Parts that come into contact with liquids or vapors are made of high-performance stainless steel and high-performance plastics. 7. Optional related accessories can be used to form different internal and external applications. 8. The buzzer can be set to silent or audible. 9. A variety of operation modes are optional, and accidental power failure can be automatically restored (mode 1: power-on equipment stops after power failure, and the set value can be changed; mode 2: power-on automatic operation after power failure, and the set value can be changed; mode 3: power-on automatic operation after power failure, and the set value cannot be changed). 10. The device serial number can be queried through the software. 11. Optional intelligent control functions: a variety of interfaces (RS485, RS232), to achieve remote communication, control equipment start and stop. 12. Optional normally open and normally closed 2 external contact points, can be connected to external alarms. 13. Optional set of 12V switch Output signal for controlling external solenoid valve. 14. An optional set of 5V external input switch signals can be used for external smart devices to control the start and stop of the instrument. 15. Optional 0-10V or 4-20mA analog signal input can be used for external smart devices to control the start and stop of the instrument.
The device is a thermostatic circulating device with a heating head. The temperature of the liquid in the bath is precisely controlled within the set range by heating up through the built-in heating system and cooling by means of heat exchange between the external circulating water or chill down tank and the chill down coil. Its intelligent PID Control system works in conjunction with the Pt100 temperature sensor to ensure temperature stability. The pressure/suction pump provides circulating power to even out the temperature of the liquid in the tank or achieve external circulating temperature control.
Sample temperature control, material testing, quality control, analysis
DIN 12876
1. Confirm the equipment specifications according to the model (such as BC213 bath volume 13L, Heating power 2000W). 2. Place the device in a Permissible Ambient Temperature (5~ 32 ° C) and Humidity (≤ 80%) environment, connect 200~ 230VAC/50Hz power supply. 3. Add the appropriate working liquid to the bath (according to the standard, flammability bath liquid can be used). 4. Set the target temperature and parameters through the control panel (if necessary, the hardware overtemperature protection temperature can be set). 5. Select the operation mode (such as power failure recovery mode) as needed and start the device. 6. During the operation of the equipment, the temperature can be monitored through the LED display. 7. After use, turn off the device according to the procedures.
• Equipment meets Safety level III/FL and can use flammability liquids, but still need to pay attention to operational safety. • Ensure that it is used at the allowable Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%). • Power supply voltage is 200~ 230VAC/50Hz before use. • Pay attention to the liquid level of the bath, the equipment has a liquid level protection function, but still need to avoid dry burning. The temperature set by the hardware overtemperature protection knob should be reasonable to provide effective protection in the event of program failure. The pump is designed to be maintenance-free, and the pressure and Flow rate are automatically adjusted, but it is still necessary to ensure that the external load is within a reasonable range. • If external circulation or temperature control is performed, the corresponding external circulation adapter and external temperature sensor should be selected. • Optional functions (such as multi-stage programming, remote communication, external alarm touch points, etc.) need to be selected and used according to actual needs.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
