Overview
The iMCoolero-204 is an input cooler that is cooled by a Compressor and uses an evaporator to directly exchange heat with the liquid medium, thereby reducing the temperature of the liquid. Equipped with an intelligent temperature controller, it has thermostatic and chill down functions, with a minimum temperature of -20 ° C, making it an efficient choice for ultra-low temperature experiments instead of dry ice. The device chills down Power concentration, high efficiency, small size, fast cooling speed, can be used with a heating circulator to reduce the system temperature below room temperature.
Features
1. It can replace ice salt, dry ice and liquidnitrogen for low temperature experiments, with a minimum temperature of -20 ° C.
2. Easy to use with open heating circulator, to achieve rapid cooling down to room temperature or below.
3. Simple operation, small size, light weight, easy to place on the desktop.
4. Equipped with temperature alarm function, reminding simultaneously through lighting and sound.
5. Temperature Adjustment.
6. Key components of the refrigeration system (such as Compressors and circulating fans) are imported from large factories.
Principle
The device drives the refrigeration cycle through the Compressor, and the refrigerant directly exchanges heat with the liquid medium to be cooled down in the evaporator, absorbing the liquid heat to reduce its temperature. At the same time, the built-in intelligent PID temperature controller precisely adjusts the refrigeration output according to the feedback of the Pt100 temperature sensor to achieve the set target temperature and maintain stability.
Applications
Laboratory low temperature experiment, alternative dry ice or liquidnitrogen chill down scene, with heating circulator for system cooling
Steps
1. Put the equipment into the liquid medium to be chilled down.
Connect the power supply (200~ 230VAC/50Hz).
3. Set the target temperature through the temperature controller.
4. Start the equipment, the Compressor starts to work, and the liquid is cooled by the evaporator.
5. During the operation of the equipment, the temperature can be monitored through the controller, and Adjustment can be used (if required).
6. After reaching the set temperature, the device enters the thermostatic control mode.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%).
Equipment is allowed to operate continuously, but it is necessary to ensure good heat dissipation.
• Pay attention to the working noise of the equipment (≤ 55dB).
• Before use, please confirm that the Power supply voltage meets the requirements (200~ 230VAC/50Hz).
• The equipment has lighting and sound alarm functions, please deal with the alarm in time.
• Device weight (17kg) when moving or installing.
• The refrigerant is R12, and maintenance requires professional operation.
