Please contact customer service
Temperature Control Stability of +/- 0.1 ℃, Heating power 2000W, Strong pressure/suction pump for domestic circulation and external circulation applications, Multi-point calibrated and multiple safety alarm functions.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030890
Service :The delivery and service By NBCLab.Com
The LABTOP HC 20E immersion thermostatic circulator is a multi-functional heating device that integrates heating, stirring, temperature measurement, temperature control and circulation functions. It can be used alone or easily installed on various special baths (such as stainless steel, transparent polycarbonic acid ester and organic Glass baths) with a threaded back clip to achieve precise temperature control of the sample in the bath. When used in combination with the chill down thermostatic circulator, the minimum temperature can reach -20 ° C. Equipped with powerful pressure and suction pumps, the unit meets DIN 12876 Safety level III FL for flammability liquids and supports external circulation via pump adapters or connection of chilled down coils to cold water sources.
1. Compact in size, it can be easily installed in different sinks through threaded back clamps. 2. Equipped with a powerful pressure/suction pump. 3. Good Temperature Control Stability. 4. In line with DIN12876 standard Safety level III (FL), flammability liquids can be used. 5. Convenient for domestic circulation and external circulation applications. 6. Equipped with high and low temperature alarm function. 7. With over-temperature automatic cut-off/anti-dry burning function. 8. Equipped with low liquid level alarm function. 9. Adjustment of multiple points. 10. When the alarm is called, the light and sound are reminded at the same time. 11. Adjustable Temperature range, safer to use. 12. Communication interface configurable (RS232/USB).
The device monitors the medium temperature in real time through the built-in Pt100 temperature sensor, and uses the intelligent PID control algorithm to precisely adjust the Heating power to maintain the set target temperature. Its powerful pressure/suction pump can realize the forced flow of the medium in the internal or external circulation pipeline of the device, ensuring Temperature uniformity. The device integrates multiple Safety protection mechanisms, such as over-temperature cutoff, low liquid level protection, etc., to ensure safe and reliable operation.
Laboratory thermostatic control, Chemical Reaction Kettle temperature control, sample thermostatic treatment, material testing, biological foster, matching special bath use
DIN 12876
1. According to the application requirements, choose to use it alone or install the device to a suitable sink through a threaded back clip. 2. Ensure that the liquid depth in the bath meets the minimum requirement (150mm), and connect the necessary circulation lines (such as external circulation). 3. Turn on the power supply (200~ 230VAC/50Hz). 4. Set the required target temperature and safe Temperature range through the device control panel. 5. Start the heating and circulation pump, and the equipment starts working. 6. During operation, the real-time temperature can be monitored through the LED display. 7. After use, turn off the device according to the procedures and disconnect the power supply.
• Please ensure that the device is used at the allowable Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%). • When using, it is necessary to ensure that the liquid in the bath is not lower than the minimum depth requirement to prevent low liquid level alarm or dry burning. Equipment has functions such as over-temperature protection, but users still need to set a reasonable adjustable safe Temperature range to ensure safety. • When conducting external circulation or connecting chilled down sources, make sure that the piping connection is correct and firm. • If using flammability liquids, ensure that the operating environment complies with relevant safety regulations. • When the equipment alarms (lights and sounds), please check and troubleshoot in time. • Regularly calibrate to ensure temperature control accuracy. • Note that the input Power of the device is large (3100W), please ensure that the power supply line meets the requirements.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
