Please contact customer service
Heating power of the equipment up to 3000W, Flow rate 12L/min, with strong pressure/suction pump, Temperature Control Stability, support domestic circulation and external circulation applications, and has high and low temperature alarm, over temperature automatic cut off, low level alarm and other multiple Safety protection functions.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030891
Service :The delivery and service By NBCLab.Com
The immersion thermostatic circulator HC 30E is a multi-functional heating device that integrates heating, stirring, temperature measurement, temperature control and circulation functions. It can be used alone or flexibly with a variety of special baths (e.g. stainless steel, polycarbonic acid ester, organic Glass baths), and can be easily installed on different baths through a threaded back clip to achieve precise temperature control of samples in the bath. The device can be used in combination with a chill down thermostatic circulator to extend the Temperature range to -20 ° C and is equipped with a powerful pressure pump and suction pump to support internal and external circulation applications. It meets the DIN12876 standard Safety level III (FL) and allows the use of flammability liquids.
1. Compact in size, it can be easily installed in different sinks through threaded back clamps. 2. Equipped with powerful pressure pump and suction pump. 3. Good Temperature Control Stability. 4. In line with DIN12876 standard Safety level III (FL), flammability liquids can be used. 5. Convenient domestic circulation and external circulation applications. 6. Equipped with high and low temperature alarm function. 7. With over-temperature automatic cut-off/anti-dry burning function. 8. Equipped with low liquid level alarm function. 9. Adjustment of multiple points. 10. When the alarm is called, the light and sound are reminded at the same time. 11. Adjustable Temperature range, safer to use. 12. Communication interface configurable (RS232/USB).
The device monitors the medium temperature in real time through the built-in Pt100 temperature sensor and uses the intelligent PID control algorithm to precisely adjust the Heating power to maintain the set target temperature. Its powerful pressure/suction pump drives the medium to circulate within the system (domestic circulation) or with external baths/equipment (external circulation) to ensure even temperature distribution. When the temperature exceeds the limit, the liquid level is too low or the risk of dry burning is detected, the system triggers multiple Safety protection mechanisms.
Laboratory thermostatic control, Chemical Reaction Kettle temperature control, sample thermostatic foster, material testing, biopharmaceutical, Petrochemicals, matching special bath use
DIN 12876
1. According to the application requirements, choose to use it alone or install the instrument to a suitable sink through a threaded back clip. 2. Ensure that the liquid depth of the bath meets the minimum requirements (≥ 150mm), and connect the circulation pipeline (if external circulation is required). 3. Turn on the power supply (200~ 230VAC/50Hz). 4. Set the required target temperature and safe Temperature range through the control panel. 5. Start the heating and circulation pump, and the equipment starts working. 6. During operation, the real-time temperature can be monitored through the LED display. 7. After use, turn off the device according to the procedures and disconnect the power supply.
• Please make sure to use it at the allowable Ambient Temperature (5~ 32 ° C) and relative humidity (≤ 80%). • When using, it is necessary to ensure that the liquid depth in the bath is not less than the minimum requirement (150mm) to prevent low liquid level alarm or dry burning. • Safety protection (such as over-temperature cut-off, low level protection), but it is still necessary to regularly check its functional effectiveness. • When calibrating or using flammability liquids, strict compliance with relevant safety regulations is required. • When connecting external circulation lines or chill down sources, make sure the interfaces match and are firmly connected. • There is noise (≤ 45dB) when the equipment is running, please place it in a suitable working environment. • Be sure to disconnect power before moving or cleaning equipment.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
