Please contact customer service
Temperature Control Stability of +/- 0.02 ℃, Heating power 2000W, Pump Flow rate 22L/min. With powerful pressure/suction pump, support domestic circulation and external circulation applications, and integrate high and low temperature alarm, over temperature automatic cut-off, low liquid level alarm and multi-point calibrating and other safety and practical functions.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030892
Service :The delivery and service By NBCLab.Com
The LABTOP HC 20 immersion thermostatic circulator is a multi-functional heating device that integrates heating, stirring, temperature measurement, temperature control and circulation functions. It can be used independently or easily installed on a variety of special baths (such as stainless steel, transparent polycarbonic acid ester and organic Glass baths) with a threaded back clip to achieve precise temperature control of the sample in the bath. When used with the chill down thermostatic circulator, the minimum temperature can reach -20 ° C. Equipped with a powerful pressure pump and suction pump, the unit meets DIN 12876 Safety level III (FL, flammability liquids can be used), and can be controlled by external circulation through the pump adapter, or connected to the chilled down coil to use cold water source.
1. Compact in size, it can be easily installed in different sinks through threaded back clamps. 2. Equipped with a powerful pressure/suction pump. 3. Good Temperature Control Stability. 4. In line with DIN12876 standard Safety level III (FL), flammability liquids can be used. 5. Convenient for domestic circulation and external circulation applications. 6. Equipped with high and low temperature alarm function. 7. With over-temperature automatic cut-off/anti-dry burning function. 8. Equipped with low liquid level alarm function. 9. Adjustment of multiple points. 10. When the alarm is called, the light and sound are reminded at the same time. 11. Adjustable Temperature range, safer to use. 12. Communication interfaces (RS232/USB) can be configured.
The device monitors the medium temperature in real time through the built-in Pt100 temperature sensor and uses the intelligent PID control algorithm to precisely adjust the Heating power to maintain the set target temperature. Its powerful pressure/suction pump drives the medium to circulate inside or outside the system (through the adapter) to ensure even temperature distribution. Safety protection mechanisms such as over-temperature cutoff, low-level protection, etc. are integrated to ensure safe and reliable operation.
Laboratory thermostatic control, Chemical Reaction Kettle temperature control, sample thermostatic treatment, material testing, biological fostering, supporting all kinds of special baths
DIN 12876
1. Depending on the application requirements, choose to use it alone or install the instrument to a suitable bath through a threaded back clip. 2. Ensure that the liquid level in the bath meets the minimum depth requirement (150mm), and connect the circulation pipeline (such as external circulation). 3. Turn on the power supply (200~ 230VAC/50Hz). 4. Set the required temperature and safety parameters through the equipment control panel. 5. Start the heating and circulation pump, and the equipment starts working. 6. During operation, real-time temperature and status can be monitored through the LED display. 7. After use, turn off the device and disconnect the power according to the procedures.
• Power supply voltage meets requirements (200~ 230VAC/50Hz) before use. • Ensure that the Ambient Temperature is 5~ 32 ℃ and the relative humidity does not exceed 80%. • When using, the liquid level in the bath must reach the minimum depth requirement (150mm) to prevent low liquid level alarm or dry burning. Equipment has functions such as over-temperature protection, but it is still necessary to avoid operating under extreme conditions beyond the specified Temperature range (RT + 10~ 220 ℃) or the safe Temperature range. • When conducting external circulation or connecting chilled down sources, make sure that the piping connection is correct and firm. • If using flammability liquids, be sure to confirm that the equipment is in working condition in accordance with DIN12876 III/FL Safety level. • When the equipment alarms (lights and sounds), please check and troubleshoot in time. • Be sure to disconnect the power supply before cleaning and maintenance. • Instrument operating noise ≤ 45dB, please place in a suitable working environment.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
