Please contact customer service
Temperature Control Stability up to +/- 0.02 ℃, Heating power 3000W, Pump Flow rate 22L/min. With high and low temperature and low liquid level alarm, over-temperature automatic cut-off and anti-dry burning functions, support multi-point calibrating, in line with DIN12876 safety standards.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030893
Service :The delivery and service By NBCLab.Com
The LABTOP HC 30 is an immersion thermostatic circulator/controller that integrates heating, stirring, temperature measurement, temperature control and circulation functions. It can be used independently or flexibly with a variety of special baths (such as stainless steel, clear carbonic acid ester and organic Glass baths). It can be easily installed on any sink with a threaded back clip to achieve precise temperature control of samples in the bath. The device can be used in conjunction with a chill down thermostatic circulator to extend the Temperature range to -20 ° C and is equipped with a powerful pressure pump and suction pump, DIN12876 Safety level III (FL, flammability liquids can be used), supports external circulation temperature control and connects cold water sources to chill down.
1. Compact in size, it can be easily installed on different sinks through threaded back clamps. 2. Equipped with a powerful pressure/suction pump. 3. Good Temperature Control Stability. 4. Safety level III (FL) in accordance with DIN12876 standard, flammability liquids can be used. 5. Convenient domestic circulation and external circulation applications. 6. Equipped with high and low temperature alarm function. 7. With over-temperature automatic cut-off/anti-dry burning function. 8. Equipped with low liquid level alarm function. 9. Adjustment of multiple points. 10. When the alarm is called, the light and sound are reminded at the same time. 11. Adjustable Temperature range, safer to use. 12. Communication interface configurable (RS232/USB).
Through its immersion design, the device integrates heating, circulation and temperature control units and works directly in the bath liquid. Its built-in temperature sensor (Pt100) monitors the liquid temperature in real time. The intelligent PID controller precisely adjusts the Heating power according to the deviation of the set value and the actual value to maintain the stability of the temperature. At the same time, its built-in pressure/suction pump drives the liquid to circulate in the internal or external piping of the system, ensuring even temperature in the bath or external equipment. When the temperature exceeds the limit, the liquid level is too low or the risk of dry burning is detected, the system triggers multiple Safety protection mechanisms.
Laboratory thermostatic control, Chemical Reaction Kettle temperature control, sample thermostatic treatment, material testing, biological foster, matching special bath use
DIN 12876
1. According to the application requirements, choose to use it alone or install the instrument to a suitable sink through a threaded back clip. 2. Ensure that the bath liquid depth meets the minimum requirement of 150mm, and immerse the instrument to a suitable depth (63... 130mm). 3. Connect the power supply (200~ 230VAC/50Hz). 4. For external circulation or connection to chill down water, install the appropriate pump adapter or chill down coil. 5. Set the target temperature and safe Temperature range through the instrument panel. 6. Start the equipment, and the instrument will begin to heat, circulate, and precisely control the temperature. 7. During operation, monitoring or data recording can be carried out through the optional Communication interface (RS232/USB).
Before use, make sure that the bath liquid meets the minimum depth requirements and check the liquid level to prevent low liquid level alarm or dry burning. • Equipment meets Safety level III (FL), but it is still necessary to strictly adhere to relevant safety regulations when using flammability liquids. • Do not operate the device beyond the Permissible Ambient Temperature (5~ 32 ° C) or relative humidity (> 80%). Equipment has over-temperature protection and secondary protection, but users still need to set a reasonable adjustable safety Temperature range to enhance safety. • When connecting external circulation, make sure that the pipeline connection is firm to avoid leakage. • There are light and sound alarm functions when the equipment is running. If there is an alarm, please check the cause in time. • Instrument noise ≤ 45dB, please place in a suitable working environment. • Multi-point Adjustment when calibrating and maintaining.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
