Please contact customer service
Adopting retractable bridge design, it can be easily installed on the sink with width not greater than 885mm. Temperature Control Stability up to +/- 0.02K, Heating power 2000W, Pump Flow rate 22L/min, High and Low Temperature and Low Liquid Level Alarm, Anti-Dry Burn and Multi-point Adjustment, in line with DIN12876 safety standards.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030896
Service :The delivery and service By NBCLab.Com
The LABTOP BHC 20 is an immersion thermostatic circulator/controller that integrates heating, stirring, temperature measurement, temperature control and circulation functions. It features a retractable bridge design and can be easily installed on a sink with a width of no more than 885mm for precise temperature control of the sample in the bath. The device can be used in combination with a chill down thermostatic circulator to extend the Temperature range to -20 ° C, and is equipped with a powerful pressure pump and suction pump. It meets the DIN12876 standard Safety level III (FL, flammability liquids can be used), supports external circulation temperature control and connects cold water sources.
1. The instrument can be easily installed on different sinks through the retractable bridge. 2. Powerful pressure/suction pump. 3. Good Temperature Control Stability. 4. Safety level III (FL) in accordance with DIN12876 standard can use flammability liquids. 5. Convenient domestic circulation and external circulation applications. 6. High and low temperature alarm function. 7. Over-temperature automatic cut-off/anti-dry burning function. 8. Low liquid level alarm function. 9. Adjustment of multiple points. 10. When the alarm is called, the light and sound are reminded at the same time. 11. Adjustable Temperature range, safer to use. 12. Communication interface configurable (RS232/USB).
The device is fixed to the sink by a retractable bridge, and its immersion part heats, stirres and circulates the medium in the bath. The built-in Pt100 temperature sensor monitors the temperature in real time, and precisely adjusts the Heating power through the intelligent PID Control system to maintain the set temperature value. The configured pressure/suction pump can realize the forced circulation of the medium in the bath (domestic circulation) or pump the medium to an external device for temperature control and then return (external circulation), so as to achieve a precise and stable temperature environment.
Laboratory thermostatic control, Chemical Reaction Kettle temperature control, sample thermostatic treatment, material testing, biological fostering, various industrial and scientific processes requiring precise temperature control
DIN 12876
1. Adjust and fix the retractable bridge of the instrument according to the width of the sink to ensure a stable installation. 2. Place the immersion part of the equipment in the bath, ensuring that the immersion depth is within the range of 63... 130mm, and the minimum depth of the bath is 150mm. 3. Connect the power supply (200~ 230VAC/50Hz). 4. Set the required temperature value and Miscellaneous parameters (such as safe Temperature range) through the equipment panel. 5. Start the equipment, and the heating and circulation functions start to work. 6. If external circulation is required, connect the pump adapter and the corresponding pipeline. 7. To connect cold water source, configure and use chill down coil. 8. After use, turn off the device and disconnect the power according to the procedures.
• When installing, ensure that the width of the sink does not exceed 885mm, and the instrument is firmly installed. • When using, the liquid depth in the bath must meet the minimum requirement of 150mm, and pay attention to the immersion depth range of the equipment. • Permissible Ambient Temperature of the equipment is 5~ 32 ℃, relative humidity ≤ 80%, please ensure that it is used in a suitable environment. • Note that the equipment has the functions of automatic cutoff over temperature, anti-dry burning and low liquid level protection, but it is still necessary to avoid dry burning. • When the alarm function (light and sound) is enabled, it is necessary to deal with the problem of the alarm prompt in time. • When calibrating, follow the relevant procedures. Equipment operating noise is less than or equal to 45dB, which is within the normal range. • Before maintaining or moving equipment, be sure to disconnect the power supply.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
