Please contact customer service
Adopting telescopic bridge design, it can adapt to water Tank with width of 345-885mm, Heating power up to 3000W, Pump Flow rate 22L/min, with pressure/suction double pump function, support internal and external circulation and multi-point calibrating.
Category : Thermostatic Bath
Brand : labtop
SKU : NB030897
Service :The delivery and service By NBCLab.Com
The LABTOP BHC 30 immersion thermostatic circulator is a multi-functional heating device that integrates heating, stirring, temperature measurement, temperature control and circulation functions. It features a retractable bridge design, which can be easily installed on sinks up to 885mm wide for precise temperature control of samples in the bath. The device can be used in combination with a chill down thermostatic circulator to extend the Temperature range to -20 ° C. All models are equipped with powerful pressure and suction pumps, DIN12876 compliant Safety level III (FL, flammability liquids can be used), and can be used for external circulation temperature control through a pump adapter or connected to a chilled down coil to a cold water source.
1. The instrument can be easily installed on different sinks through the retractable bridge. 2. Powerful pressure/suction pump. 3. Good Temperature Control Stability. 4. Safety level III (FL) in accordance with DIN12876 standard can use flammability liquids. 5. Convenient domestic circulation and external circulation applications. 6. High and low temperature alarm function. 7. Over-temperature automatic cut-off/anti-dry burning function. 8. Low liquid level alarm function. 9. Adjustment of multiple points. 10. When the alarm is called, the light and sound are reminded at the same time. 11. Adjustable Temperature range, safer to use. 12. Communication interface configurable (RS232/USB).
The device is fixed to the external water tank by a retractable bridge, and its built-in heating element heats the circulating medium, and drives the medium in the system domestic circulation through a strong pump (with both pressure and suction functions) to realize the temperature control of the sample in the water tank. The temperature sensor (Pt100) monitors the temperature in real time, and the intelligent PID controller precisely adjusts the deviation between the set value and the actual value to ensure the temperature is stable. The equipment has a variety of Safety protection mechanisms, such as over-temperature cut-off, low liquid level alarm, etc., to ensure safe operation.
Laboratory thermostatic control, Chemical Reaction Kettle temperature control, Sample thermostatic treatment, Material testing, Biological fostering, Extended cryogenic applications with chilled down equipment
DIN 12876
1. Adjust and fix the retractable bridge according to the width of the sink, and install the instrument on the sink. 2. Ensure that the bath depth meets the minimum requirement of 150mm. 3. Connect the power supply (200~ 230VAC/50Hz). 4. Connect external circulation lines (using pump adapter) or chill down coil as required. 5. Add the appropriate circulating medium to the system (depending on the Safety level, flammability liquids can be used). 6. Set the target temperature and safe Temperature range through the control panel. 7. Start the equipment and observe the pump operation and heating status. 8. During the operation of the device, the LED display will display the real-time temperature. 9. After use, turn off the device according to the program and disconnect the power supply.
When installing, please ensure that the width of the sink is within the applicable range of the instrument telescopic bridge (no greater than 885mm). The depth of the bath must be at least 150mm. * The equipment protection level is IP20, which needs to be used in a drying environment to avoid liquid splashing. * When using flammability liquids, ensure compliance with DIN12876 III/FL Safety level requirements. Please check the liquid level before operation to avoid triggering an alarm or causing equipment damage. * Set the safe Temperature range to take full advantage of the device's over-temperature protection function. * Permissible Ambient Temperature 5~ 32 ℃, relative humidity ≤ 80%, please use under these conditions. * The input Power of the device is 3100W, please ensure that the power supply line meets the requirements. * When calibrating, please refer to the manual to use Multi-point Adjustment. When the alarm function (light and sound) is enabled, please deal with the alarm information in a timely manner. * When connecting the external circulation, please ensure that the pipeline connection is firm and there is no leakage. * Device weight is 10kg, please pay attention to safety when moving and installing.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
