Overview
The MC-2000C coating platings thickness gauge is a High Accuracy measuring instrument produced by KODIN using single chip technology. Measurement range of 0~ 5000 μ m, with digital display, stable indication, low power consumption, simple and convenient operation, touch button, single Probe full scale measurement, small size, light weight and other features, and with storage, readout, statistics, low voltage indication, system calibrating and other functions, its performance has reached the professional level of contemporary international similar instruments.
Features
1. Single Probe for full scale measurement, range 0~ 5000μm.
2. Using single chip technology, high accuracy, digital display, stable indication.
3. Low power consumption, simple and convenient operation, using touch buttons.
4. Small size and light weight (about 160g with battery).
5. Data storage function, can store 600 measurement data, and can delete single or all data.
6. With statistical function, it can calculate the average, MAX Maximum, MIN Minimum.
7. Can be calibrated systematically.
8. With under-voltage display function.
9. Support optional micro printer for data printing.
10. Support automatic shutdown and manual shutdown in two ways.
Principle
The MC-2000C coating platings thickness gauge uses electromagnetic induction (magnetic thickness measurement method) to measure the thickness of coating platings. The instrument Probe generates a closed magnetic loop on the surface of the part. When the thickness of the coating platings between the Probe and the ferromagnetic substrate changes, the distance between the Probe and the substrate changes accordingly, resulting in changes in the magnetoresistance of the magnetic loop and the Inductance of the Probe coil. By accurately measuring this change, the thickness of the coated platings can be calculated.
Applications
Machinery, Automobile, Shipbuilding, Petroleum, Chemical, Eletroplating, Spraying, Enamel, Plastic and other industries
Steps
1. Measurement: Full scale thickness measurement using a single Probe.
2. Storage: The measurement data is stored in the instrument, up to 600.
3. Delete: You can delete a single suspicious data in the measurement, or delete all data in the storage area.
4. Read out: Read the measurement data that has been deposited.
5. Statistics: View the average, MAX Maximum, MIN Minimum of existing data.
6. calibrate: carry out system calibrating operation.
7. Print: Connect the optional micro printer to print the Measured value.
8. Shutdown: It can be shut down automatically or manually.
Notice
• This instrument adopts magnetic thickness measurement method, which is suitable for measuring the thickness of nonmagnetic coatings (such as zinc, copper, chromium platings or paints, enamel, frp, spray, asphalt, etc.) on ferromagnetic materials (such as steel).
• When measuring, pay attention to the minimum measurement surface diameter of φ 7mm.
• When measuring curved workpieces, please pay attention to the minimum radius of curvature requirements: convex 1.5mm, concave 6mm.
• The thinnest thickness of the substrate should not be less than 0.5mm.
• Ambient Temperature of instrument 0~ 40 ℃, relative humidity ≤ 90% RH.
• Please pay attention to the battery voltage prompt icon in the upper right corner of the display screen and replace the battery in time.
• The instrument consumes up to 100mw and is powered by two 1.5V batteries.
