Overview
The HZLB LRG-500Y Intelligent Artificial climate box is a 500L precision environment simulation device with a large screen LCD program control, which is intuitive and easy to operate. It can precisely control temperature, Humidity and light conditions, and is suitable for plant growth, seed germination and other experiments and studies that need to simulate specific climate environments.
Features
1. Large-screen LCD program control, Chinese to guide the operation process, blue backlight for easy viewing at night.
2. Intuitively display the running process, light level, setting/box temperature Humidity, remaining time, Ambient Temperature and protection temperature.
3. 1-99 time periods can be set, with a time range of 0-999 hours for each time period, to achieve automatic program conversion.
4. Program control Illumrination degree 0-3 adjustable (strong light mode 0-8 adjustable).
5. The liner protection temperature can be set, and the software and hardware will automatically cut off the heating power supply when it exceeds the temperature to protect the sample.
6. With Ultra Temperature Sensor Abnormal Protection Function to Ensure Instrument and Sample Safety.
7. Using LED Cold Illuminant, the beam of light does not generate heat, extracting useful light that is conducive to plant growth.
8. With power-down memory and time automatic compensation function, it can continue the original working state after power failure.
9. With Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function.
10. Optional with full Light spectrum plant growth lamp (disinfection mold lamp), sterilization function, network data extraction (transmitted to the cloud platform through GPRS) and mobile WeChat Mini Program to view data function.
Principle
The climate box uses a microcomputer program controller to comprehensively control the heating system, refrigeration Compressor, humidification system and LED lighting system in the box. Users can set multi-stage temperature, Humidity and lighting programs, the system automatically runs according to the set values, and monitors the environment in the box in real time. When the temperature exceeds the preset protection value or the sensor is abnormal, the protection circuit will start, and the relevant power will be cut off to ensure safety. Its LED Cold Illuminant provides light of a specific Light spectrum without generating additional heat to affect the temperature control accuracy.
Applications
Plant growth studies, seed germination tests, biological fostering, insect feeding, material aging tests
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Through the large-screen LCD panel, set the required temperature, Humidity and lighting parameters according to the Chinese operation instructions.
3. Set 1-99 running periods and the duration of each period (0-999 hours) as required.
4. Set liner protection temperature and Miscellaneous protection parameters.
5. After confirming that the parameters are correct, start the device and start running.
6. During the operation, various running data and remaining time can be viewed in real time through the screen.
7. After the run is over or when it needs to be interrupted, shut down according to the program.
Notice
* The equipment should work in an environment with a temperature of 0-35 ° C and no corrosion gas.
* Power supply voltage 220V +/- 22V, Frequency in the range of 50Hz +/- 0.5Hz.
* The Compressor has a delay protection time of 3 minutes, and frequent switching should pay attention to the interval.
Pay attention to regularly check and replenish the water in the humidifier water tank (capacity 5L).
* The equipment is in continuous operation, but the Compressor is in Intermittent Operating Mode.
If the network function is optional, ensure that the device is connected to a valid GPRS network.
* When performing failure analysis, the Sensor fault identification function of the device can be utilized.
