Overview
GT1000- Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments, adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, Fast Response Speed, High Measurement accuracy, Good Stability and Repeatability. Built-in 4000mA large capacity polymer rechargeable battery, adopts 3.5 inch full view IPS industrial color screen, with storage, data printing, data export, temperature Humidity detection and other functions.
Features
1. Using new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is high.
2. Adopt 3.5-inch full-view IPS industrial-grade color screen with a resolution of 320x480, which can display technical indicators and gas concentration values well.
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched.
4. Simultaneous detection of 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, Temperature Humidity Sensor, other types of sensors.
5. With Data storage function, a single channel can store 30,800 sets of data, historical data can be visually viewed on the screen, and data can be exported; with data printing function, can be equipped with micro printers to print data; with temperature Humidity detection function.
6. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode.
7. Built-in strong air pump, can work in a micro negative pressure environment, reasonable air chamber design can ensure that the Sensor is not disturbed by pressure.
8. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions.
9. Full software Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function.
10. Full Chinese/English operation menu, simple and practical.
11. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
Principle
Using imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, the gas sample is sucked through the built-in powerful air pump, the Sensor generates Response to the specific gas concentration, and the microprocessor processes the signal and displays the result.
Applications
Various industrial environments, special environments
Standards
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
Steps
Step 1 Power on.
2. Set the detection mode, storage mode, printing mode, display mode, air pump mode and other parameters through the full Chinese/English operation menu.
3. Use the built-in air pump for sampling detection.
4. Read the gas concentration value and temperature Humidity information on the 3.5-inch IPS color screen.
5. You can view historical data on the screen, or process data through data export and printing functions.
6. Perform calibrated maintenance after use.
Notice
• Please use the instrument under the conditions of Ambient Temperature -30~ 60 ℃ and Humidity ≤ 95% RH (no condensation).
• Operating Pressure range is -30~ 100Kpa.
The instrument is marked explosion-proof (ExdII CT4), but it must still be operated under safety regulations.
• Pay attention to the overvoltage and overcharge protection functions of the instrument, and avoid strong static electricity and magnetic field interference.
• Regular use of the instrument's full software Automatic calibration and 6-level target point Adjustment to ensure measurement accuracy.
• The instrument is designed to be dustproof and waterproof with a dust filter, but it still needs to be maintained according to the Operating Environment.
• Please use the specified 4000mA rechargeable polymer battery to power the instrument.
