Overview
GT1000- Portable Gas detector, suitable for gas concentration detection in various industrial environments and special environments, adopts imported electrochemistry/infrared absorption gas Sensor and microcontroller technology, Fast Response Speed, High Measurement accuracy, Good Stability and Repeatability. The instrument has a built-in 4000mA large-capacity polymer rechargeable battery, adopts a 3.5-inch full-view IPS industrial color screen, and has functions such as storage, data printing, data export, temperature and Humidity detection.
Features
1. Using new semiconductor nano process ultra-low power 32-bit microprocessor, 24-bit ADC data collection chip, Measurement accuracy is high.
2. Adopt 3.5-inch full-view IPS industrial-grade color screen with a resolution of 320x480, which can display various technical indicators and gas concentration values well.
3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched.
4. Simultaneous detection of 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, Temperature Humidity Sensor, other types of sensors.
5. With Data storage function, a single channel can store 30,800 sets of data, and historical data can be visually viewed on the screen, and data can be exported.
6. With data printing function, it can be equipped with a micro printer to print data.
7. With Temperature Humidity detection function, it can detect the temperature Humidity value of gas in the field or pipeline.
8. Various modes can be adjusted: detection mode, storage mode, printing mode, display mode, air pump mode.
9. Built-in powerful air pump, can work in a micro negative pressure environment, reasonable air chamber design can ensure that the Sensor is not disturbed by pressure.
10. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions.
11. Full software Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function.
12. Full Chinese/English operation menu, simple and practical.
13. With temperature compensation function, the instrument adopts dustproof and waterproof design, equipped with dust Filter, which can be used in various harsh occasions.
Principle
The instrument adopts the pump-suction Sampling method, and the gas to be measured is sucked into the detection gas chamber through the built-in powerful air pump. The gas reacts or absorbs with the built-in import electrochemistry/infrared absorption gas Sensor, which converts the gas concentration signal into an electrical signal. The microcontroller (using a 32-bit microprocessor and a 24-bit ADC data collection chip) processes and calculates the signal, and finally displays the gas concentration value on the screen, and can perform operations such as Data storage and printing.
Applications
Various industrial environments, special environments
Standards
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
Steps
Step 1 Power on.
2. Set detection mode, storage mode, printing mode, display mode, air pump mode, etc. as needed.
3. Use the instrument for gas sampling.
4. View real-time or historical data on the screen.
5. You can choose to export data or connect a micro printer to print data.
6. Shut down after use.
Notice
• Ambient Temperature: -30~ 60 ℃.
• Environmental humidity: ≤ 95% RH, no condensation.
• Operating Pressure: -30~ 100Kpa.
• The instrument has an explosion-proof mark, please use it in the specified explosion-proof environment.
• The instrument is designed to be dustproof and waterproof, but care should be taken to avoid extreme conditions exceeding its Protection Rating when using it.
• Please follow the instructions for calibrating and maintaining to ensure measurement accuracy.
