Please contact customer service
Can detect 1-5 kinds of gases at the same time, Sensor any combination, support PM2.5, Temperature Humidity, etc. Adopt 3.5 inch IPS color screen, built-in powerful air pump, single channel Data storage up to 30800 groups, with overvoltage protection and temperature compensation functions.
Category : Gas Detector
Brand : KORNO
SKU : NB032021
Service :The delivery and service By NBCLab.Com
GT-1000-CO (0-500ppm) Portable Gas detector is a high-performance detection equipment under the KORNO brand, suitable for carbon monoxide gas concentration detection in various industrial environments and special environments. The instrument adopts imported Electrochemical sensor and microcontroller technology, which has the characteristics of fast Response Speed, High Measurement accuracy, Good Stability and Repeatability, and the whole machine ranks among the top domestic performance. Built-in 4000mAh large-capacity polymer rechargeable battery, equipped with a 3.5-inch full-view IPS industrial color screen, supports historical data viewing, storage, printing, export and temperature Humidity detection and other functions.
1. Measurement accuracy is high with new semiconductor nano process ultra-low power 32-bit microprocessor and 24-bit ADC data collection chip. 2. Adopt 3.5-inch full-view IPS industrial-grade color screen, the resolution is 320x480, and the display is clear. 3. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched, high and low ranges can be automatically switched. 4. Can simultaneously detect 1-5 kinds of gases, Sensor any combination, support PM2.5 dust particle Sensor, Temperature Humidity Sensor and other Sensor types. 5. With Data storage function, a single channel can store 30,800 sets of data, support screen viewing historical data, data export and micro printer printing data. 6. With Temperature Humidity detection function, it can detect the temperature Humidity value of gas in the field or pipeline. 7. Multiple modes can be adjusted, including detection mode, storage mode, printing mode, display mode, air pump mode. 8. Built-in powerful air pump, can work in a micro negative pressure environment, the air chamber design is reasonable, can ensure that the Sensor is not disturbed by pressure. 9. With overvoltage protection, overcharge protection, anti-static interference, anti-magnetic field interference and other functions. 10. Support full software Automatic calibration, Sensor has up to 6 target point Adjustment, to ensure the accuracy and linearity of measurement, and has data recovery function. 11. Provide full Chinese/English operation menu, simple and practical. 12. With temperature compensation function, dust-proof, waterproof design, equipped with dust Filter, suitable for various harsh occasions.
The gas detector adopts the pump-suction Sampling method, and the gas to be tested is sucked into the air chamber inside the instrument through a built-in powerful air pump. The core of the instrument adopts an imported electrochemistry gas Sensor. When the target gas (such as carbon monoxide) reacts with the Sensor, an electrical signal proportional to the gas concentration is generated. The signal is processed and analyzed with High Accuracy through a 24-bit ADC data collection chip and a 32-bit microprocessor. Finally, the gas concentration value is displayed in real time on the 3.5-inch IPS industrial color screen, and Data storage or output can be performed as needed.
Suitable for gas concentration detection in various industrial environments and special environments
Explosion-proof mark: ExdII CT4 (intrinsically safe type), Protection Rating: IP65
1. Power on: Long press the power button to start the instrument. 2. Mode settings: Select and adjust the required detection mode, storage mode, printing mode, display mode and air pump mode through the menu. 3. Unit switch: Select PPM,% VOL, mg/m3 or mg/L as the concentration display unit in the settings. 4. Start detection: Place the sampling Probe in the environment to be tested, and the instrument performs gas concentration detection through built-in pump suction sampling. 5. Data viewing: View gas concentration, temperature and Humidity data in real time on the screen, and enter the history menu to view the stored data. 6. Data export/printing: Connect the computer to export data through the Interface, or connect the micro printer for data printing. 7. calibrating: Automatic calibration or multi-level target point calibrating as required. 8. Shutdown: After the detection is completed, press the power button to shut down.
• Ambient Temperature of the instrument is -30~ 60 ℃, Humidity should be ≤ 95% RH and no condensation. • Operating Pressure range of -30~ 100Kpa, do not use in pressure environment beyond this range. • The instrument has an explosion-proof mark (ExdII CT4), but it still needs to be used in the specified explosion-proof environment and avoid use in places with strong static electricity or strong magnetic field interference. • The built-in battery is a 4000mAh rechargeable polymer battery, please use the matching charger and pay attention to the overcharge protection function. • The instrument adopts a dust and waterproof design (IP65) with a dust filter, but it is recommended to clean and maintain it in time after use in extremely harsh environments. • Sensors have a temperature compensation function, but should still try to avoid sudden cooling and sudden heating in an environment with drastic temperature changes. When calibrating, make sure to use standard gas and operate in a well-ventilated environment. • Do not disassemble the instrument by yourself, so as not to damage the internal components or affect the explosion-proof performance.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
